Home
Главная
Makita
Сетевые виброшлифмашины
M9203
Инструкция к товару Страница: 3

Makita M9203 Инструкция к товару онлайн [3/16] 856973

3 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: M9203

Pad size 92 mm x 185 mm

Abrasive paper size 93 mm x 228 mm

Orbits per minute 12,000 min

-1

Overall length 252 mm

Net weight 1.4 kg

Safety class

/II

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may differ from country to country.

• Weight according to EPTA-Procedure 01/2014

Symbols

The followings show the symbols used for the equipment. Be

sure that you understand their meaning before use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for the sanding of large surface of wood,

plastic and metal materials as well as painted surfaces.

Power supply

The tool should be connected only to a power supply of the same

voltage as indicated on the nameplate, and can only be operated

on single-phase AC supply. They are double-insulated and can,

therefore, also be used from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841:

Sound pressure level (L

) : 75 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may also be

used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841:

Work mode: sanding metal plate

Vibration emission (a

) : 5.0 m/s

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.