Timberk R20 40л. T-WSS40-R20-V Инструкция по эксплуатации онлайн [19/48] 857582

Timberk R20 40л. T-WSS40-R20-V Инструкция по эксплуатации онлайн [19/48] 857582
IM2022
19
no grounding loop in your power supply network, the operation of the
water heater may not be safe for your life.
5. To avoid overheating and the risk of fire, as well as damage to the
internal power system, make no alterations to the length of the power
cord and do not connect the water heater via extension cables.
6. Do not operate the heater unless it is filled with water or if water cannot
pass through the safety relief valve.
7. Never use a defective water heater.
8. Do not remove the cover of the heater whenever it is on.
9. Immediately disconnect the water heater from the electric main if you
hear a strange sound, or sense smell or smoke.
10. Always disconnect the water heater from the electric main during a
thunderstorm.
11. Always disconnect the product before maintenance, assembly,
disassembly or cleaning, or whenever it is not in use. Make sure to
clean and maintain the product in accordance with the instructions
provided in this manual.
12. Do not use hazardous chemicals to clean the water heater and do not
allow them to come into contact with it.
13. Do not use the product outdoors or in high humidity.
14. A damaged power cord must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid any hazard.
15. To avoid the risk of electrocution, do not place the power cord near
heaters, or highly flammable and combustible substances.
16. Since water in the water heater can be as hot as 75 °C, do not expose
body parts to hot water when using the product for the first time. To
prevent burns, properly adjust the temperature of the water flow.
17. Do not use the water heater for purposes other than those specified in
this manual.
18. Do not use the water heater in an explosive or corrosive environment.
Do not store gasoline or other volatile highly flammable liquids near the
product it is very dangerous!
19. Do not modify or alter the design of the water heater.
20. Any and all maintenance operations must be conducted by a
specialized organization, by qualified specialists. Improper installation
may result in denial of warranty service.
21. Once you have identified the proper installation site for the water heater,
determine the points to drill holes for the fasteners you have selected
(according to the specifications of the product you have acquired). Drill
two holes of appropriate depth in the wall using a drill bit with the
diameter corresponding to the fasteners, insert the fasteners in the
holes and then hang the electric water heater.
22. The product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lacking life
experience or knowledge, unless they are supervised or instructed in
the use of the product by a person responsible for their safety.

Похожие устройства

Скачать