Home
Главная
Bosch
На батарейках
Gluey Master Pack 06032A2105
Инструкция к товару Страница: 15

Bosch Gluey Master Pack 06032A2105 Инструкция к товару онлайн [15/247] 860462

Inserting batteries

It is recommended that you use NiMH batteries to operate the

glue pen.

u Do not use lithium-ion batteries. There is a risk of explo-

sion.

Unscrew the battery compartment cover (7) and insert the

batteries. When doing so, ensure that the polarity is correct

according to the illustration on the inside of the battery com-

partment.

If the light-up ring (6) flashes quickly, the batteries are weak.

Charge the batteries.

Always replace all the batteries at the same time. Only use bat-

teries from the same manufacturer and which have the same

capacity.

u Take the batteries out of the glue pen when you are not

using it for a prolonged period of time. The batteries can

corrode and self-discharge during prolonged storage.

Operation

Start-up

Switching on/off

To switch on the glue pen, press the on/off button (8) until

the light-up ring (6) begins to flash.

The light-up ring (6) will flash slowly during the heating pro-

cess. When it is continuously lit up, the glue pen is ready to

use.

To switch off the glue pen, press and hold the on/off button

(8) until the light-up ring goes out.

Note: The glue pen will switch itself off automatically after a

few minutes to save energy.

u Place the glue pen down in a safe place after use and let

it cool down completely before packing it away. The hot

nozzle can cause damage.

Practical advice

u Keep people and animals away from the hot adhesive

and the nozzle tip. Adhesive and nozzle tip will heat up to

150°C, posing a risk of burns. If hot adhesive comes into

contact with skin, immediately hold the affected area under

a stream of cold water for several minutes. Do not try to re-

move the hot adhesive from the skin.

Only use adhesives that have been recommended by the man-

ufacturer of the glue pen.

Only use low-temperature glue sticks (with melting points of

between 110 and 150°C). Do not use glue sticks intended for

high gluing temperatures (170–200°C).

Adhesive bonds can become unstuck when they are affected

by moisture.

Preparing for gluing

The bonding locations must be clean, dry and free from

grease.

The materials to be glued together and the work surface must

not be easily ignited or flammable.

Test whether heat-sensitive materials are suitable beforehand

on a sample workpiece.

English | 15

Bosch Power Tools 1 609 92A 4MF | (11.12.2018)

Bosch Gluey Master Pack 06032A2105 Инструкция к товару онлайн [15/247] 860462

Похожие устройства