Hilti AG 125-A22 коробка 2109989 Инструкция к товару онлайн [33/312] 861632

*2111866*

2111866 English 27

5. Release the spindle lockbutton and remove the accessory tool.

6.7.5 Fitting the core bit 12

1. Remove the battery. → page 24

2. Fit the side handle. → page 24

3. Fit the guard. → page 25

4. Place the core bit in position and tighten it hand-tight.

5. Press and hold down the arbor lockbutton.

6. Tighten the core bit with a suitable open-end wrench.

7. Then release the spindle lockbutton and remove the open-end wrench.

7 Operation

7.1 Grinding

CAUTION

Risk of injury. The accessory tool may suddenly stick or stall.

▶ Use the power tool with the side handle (or optional hoop grip) fitted and always hold the power tool

securely with both hands.

7.2 Cutting

▶ When cutting, apply moderate feed pressure and do not tilt the power tool or the cutting disc (when

working, hold at approx. 90° to the surface being cut).

For best results when cutting profiles and square tube, start cutting at the smallest cross section.

7.3 Rough grinding

CAUTION

Risk of injury. The abrasive cutting disc could shatter and flying fragments may cause injury.

▶ Never use abrasive cutting discs for grinding.

▶ Move the power tool to and fro while maintaining a 5° to 30° angle of attack and applying moderate

pressure.

▶ This will avoid overheating and discoloration of the workpiece and help ensure an even surface finish.

7.4 Switching on (tool equipped with switch-on safety interlock) 13

The on / off switch with safety lock (switch-on interlock) gives you full control of the switch function

and avoids unintentional starting.

1. Push the safety lock forward.

▶ The on/off switch is unlocked.

2. Press the on/off switch as far as it will go.

▶ The power tool’s motor runs at no-load speed.

7.5 Switching off (tool equipped with switch-on safety interlock)

▶ Release the on/off switch.

▶ The safety lock jumps automatically into the locked position.

8 Care and maintenance

WARNING

Risk of injury with battery inserted !

▶ Always remove the battery before carrying out care and maintenance tasks!