DWT BM04-10 C 5.2.8 Инструкция по эксплуатации онлайн [23/136] 861715

DWT BM04-10 C 5.2.8 Инструкция по эксплуатации онлайн [23/136] 861715
23
English
Changing the rotational directions
Change the direction of rotation only
after a full stop of the motor, acting oth-
erwise may cause damage to the power
tool.
Rotation to the right (drilling, screwing in) - move
the rotational direction switch 4 to the right�
Rotation to the left (unscrewing) - move the rota-
tional direction switch 4 to the left�
Recommendations
on the power tool operation
Drilling (see g. 8-11)
Grease the drill bit regularly when drilling holes in met-
als (except drilling non-ferrous metals and their alloys)�
When drilling hard metals, apply more force to the
power tool and lower the rotation speed�
When drilling large diameter holes in metal, rst drill
a hole with a smaller diameter and ream it till the nec-
essary diameter (see g. 8).
In order to avoid splitting of the surface at an exit
point of a drill bit when drilling holes in wood, follow the
instructions shown in gure 9.
In order to decrease dust production when drilling holes
in walls and ceilings, take actions indicated in gure 10.
When drilling holes in glazed ceramic tiles, in order
to improve the drill centering accuracy and to save the
glaze from damage, apply adhesive tape to the pre-
sumed hole center and drill after that (see g. 11). Start
drilling at lower speed increasing it as the hole deepens�
Screwing the screws (see g. 12)
To make fastening of screws easier and in order to
prevent cracking of the work pieces, rst drill a hole
with a diameter equal to 2/3 of a diameter of the screw
If you are connecting work pieces with the help of
screws, in order to achieve durable joint without get-
ting cracks, fracturing or layering, take actions shown
in gure 12.
Power tool maintenance /
preventive measures
Before carrying out any works on the power tool it
must be disconnected from the mains
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
ush the power tool with compressed air thought the
ventilation slots 2
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.dwt-pt.com
Transportation
of the power tools
Categorically not to drop any mechanical impact on
the packaging during transport�
When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�
Environmental
protection
Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging should
be sorted for environment-friendly recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
The manufacturer reserves the possibility to introduce changes.

Содержание

Похожие устройства

Скачать