Makita DUB184Z Инструкция по эксплуатации онлайн [9/28] 861897
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Makita DUB184Z Инструкция по эксплуатации онлайн [9/28] 861897

Makita DUB184Z Инструкция по эксплуатации онлайн [9/28] 861897
9 ENGLISH
Indicator lamps Remaining
capacity
Lighted O󰀨 Blinking
75%to100%
50%to75%
25%to50%
0%to25%
Charge the
battery.
Thebattery
mayhave
malfunctioned.
NOTE: Depending on the conditions of use and the
ambienttemperature,theindicationmaydi󰀨erslightly
fromtheactualcapacity.
NOTE:Therst(farleft)indicatorlampwillblinkwhen
thebatteryprotectionsystemworks.
Machine/battery protection system
Themachineisequippedwithamachine/batteryprotection
system.Thissystemautomaticallycutso󰀨powertothe
motortoextendmachineandbatterylife.Themachinewill
automaticallystopduringoperationifthemachineorbat-
teryisplacedunderoneofthefollowingconditions:
Overload protection
Whenthemachineorbatteryisoperatedinamannerthat
causesittodrawanabnormallyhighcurrent,themachineauto-
maticallystopswithoutanyindication.Inthissituation,turnthe
machineo󰀨andstoptheapplicationthatcausedthemachineto
becomeoverloaded.Thenturnthemachineontorestart.
Overheat protection
Whenthemachineorbatteryisoverheated,themachine
stopsautomatically.Inthiscase,letthemachineand
batterycoolbeforeturningthemachineonagain.
Overdischarge protection
Whenthebatterycapacityisnotenough,themachine
stopsautomatically.Inthiscase,removethebattery
fromthemachineandchargethebattery.
Switch action
WARNING: Before installing the battery car-
tridge into the machine, always check to see that
the switch trigger actuates properly and returns
to the "OFF" position when released.
►Fig.10: 1. Switch trigger
Tostartthemachine,simplypulltheswitchtrigger.The
speedincreasesbyincreasingpressureontheswitch
trigger. Release the switch trigger to stop.
Cruise control function
The cruise control function allows the operator to main-
tain a constant speed without pulling the trigger. To
increase the speed, turn the control lever forward. To
decreasethespeed,turnthecontrolleverbackward.
►Fig.11: 1. Control lever
Accidental re-start preventive function
Evenifyouinstallthebatterycartridgewhilepullingthe
switch trigger, the machine does not start. To start the
machine,rstreleasetheswitchtriggerandreturnthe
controlleverfully,andthenpulltheswitchtrigger.
OPERATION
CAUTION: Do not place the machine on the
ground while it is switched on.Sandordustmay
enter from suction inlet and cause a malfunction or
personalinjury.
Holdthemachinermlywithahandandperformtheblow-
ingoperationbymovingitaroundslowly.Whenblowing
aroundbuilding,bigstoneorvehicle,directthenozzle
awayfromthem.Whenperforminganoperationinacor-
ner, start from the corner and then move to wide area.
►Fig.12
MAINTENANCE
CAUTION: Always be sure that the machine is
switched o󰀨 and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers,alwaysusingMakitareplacementparts.
Cleaning the machine
Cleanthemachinebywipingo󰀨dustwithadryclothor
onedippedinsoapywaterandwrungout.
►Fig.13
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Remove dust or dirt from the suction inlet at the rear of the machine.
►Fig.14: 1. Suction inlet
Storage
Thehookholeonthebottomofthemachineisconve-
nient for hanging the machine from a nail or screw on
the wall. Store the machine in a place out of the reach
of children and not exposed to moisture or rain.
►Fig.15: 1. Hole

Похожие устройства

Скачать