Home
Главная
Al-Ko
Аккумуляторные
SF 4036 113574
Инструкция к AL-KO SF 4036 113574 Страница: 47

Al-Ko SF 4036 113574 Инструкция к AL-KO SF 4036 113574 онлайн [47/476] 862200

Al-Ko SF 4036 113574 Инструкция к AL-KO SF 4036 113574 онлайн [47/476] 862200

442240_a 47

Maintenance and care

4. Empty the grass collector.

5. Attach the grass collector.

6.7 Moving the appliance on the grass

■

Watch out for objects in the grass and re-

move them from the working area.

■

Only control the appliance by the handlebar.

■

Move the appliance at walking speed.

■

Always move the appliance across the slope.

■

In the following cases, visit the customer ser-

vice workshop:

■

Motor no longer starts.

■

Appliance has moved onto an obstruction.

■

Appliance vibrates and does not run

smoothly.

■

The blades of the scarifier roller or steel

spring prongs of the aeration roller are

bent.

7 MAINTENANCE AND CARE

WARNING!

Danger of cutting injuries

Danger of cutting injuries

when reaching into sharp-

edged, moving appliance

parts and into cutting tools.

■

Before maintenance,

care and cleaning work,

always switch off the

appliance. Remove the

rechargeable battery.

■

Always wear protective

gloves during mainte-

nance, care and clean-

ing work.

7.1 Maintenance schedule

Before every use

■

Perform visual inspection.

■

Check the safety devices, control elements

and all screw connections for damage and

secure fitting.

■

Replace damaged parts before operation.

After each use

■

Remove the rechargeable battery from the

appliance and store in a frost-protected area.

7.2 Replacing the scarifier roller and

aeration roller (optional) (16)

The scarifier roller is intended for coarse scarify-

ing work and the aeration roller (optional) for fine

scarifying work (see chapter 2.3 "Scope of sup-

ply", page33).

Removing the roller

1. Stop the appliance and wait until the blade

system has stopped.

2. Turn the key switch off and remove the bat-

tery from the appliance.

3. Turn the appliance over.

4. Press (16/a) the locking bar (16/1) until the

lock is released.

5. Fold the locking bar (16/1) upwards (16/b).

6. Gently push the roller (16/2) towards the

housing (16/c).

7. Remove (16/d) the roller (16/2).

Installing the roller

Proceed in reverse order.

7.3 Cleaning the blade system

IMPORTANT!

Danger from water

Water in the appliance caus-

es short-circuits and destroys

electrical components.

■

Do not spray the appli-

ance with water.

■

Only use a broom or a

brush for cleaning.

1. Stop the appliance and wait until the blade

system has stopped.

2. Turn the key switch off and remove the re-

chargeable battery from the appliance.

3. Remove the grass collector see chapter 6.6

"Attaching and removing the grass collector

[optional] (15)", page46.

4. Tip the appliance onto the side and clean the

blade system with a broom or brush.

Похожие устройства