Home
Главная
Metabo
Аккумуляторные
SSW 18 LTX 400 BL 602205800
Инструкция к товару Страница: 9

Metabo SSW 18 LTX 400 BL 602205800 Инструкция к товару онлайн [9/52] 862458

ENGLISH en

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10°C and

30°C.

"Li-Power" li-ion battery packs have a capacity and

signal indicator: (9)

- Press the button (8), the LEDs indicate the charge

level.

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

Removal:

Press the battery pack release (7) button and pull

the battery pack (5) forwards

Inserting:

Slide in the battery pack (5) until it engages.

6.2 Setting the direction of rotation, engag-

ing the transporting safety device

(switch-on lock)

Do not actuate the rotation selector switch or

engage the transportation lock (2) unless the

motor has stopped completely!

Actuate the rotation selector switch / Engage the

transportation lock (2)

R = Right rotation set

(insert screws)

L = Left rotation set

(remove screws)

0 = Central position: transportation lock setting

(switch-on lock)

6.3 Switching on and off

Switching on: press the trigger switch (3).

Switching off: release the trigger switch (3).

6.4

Speed

/ Tightening torque

The speed and tightening torque are connected

directly. The lower the speed, the lower the tight-

ening torque.

The speed and tightening torque can be adjusted

steplessly by pressing the trigger (3) firmly or lightly,

thus adapting to working conditions.

You can use the setting wheel (5) on the SSW 18

LTX 400 BL to adjust the rotational speed and tight-

ening torque (12 stages).

Recommendation: determine the correct setting

by carrying out trial screwdriving.

6.5

Changing

SSW... screwdriving bits

Inserting screwdriving bit: Fit the tool on the

square attachment (1) until the limit stop.

Removing screwdriving bit: Pull the tool from the

square attachment (1).

The screwdriving bit used must match the

screw.

Damaged screwdriving bits must not be used.

Mount the machine on the screw, ensuring it is

aligned straight.

The screwdriving process has two elements:

inserting the screw and

tightening the screw with the percussion mech-

anism.

The tightening torque depends on the impact dura-

tion.

With an impact duration of approx. 5 seconds, the

maximum tightening torque has been reached.

The torque curve depends on the type of applica-

tion:

With a hard screwdriving application (screw-

couplings in hard material such as metal), maximum

tightening torque is already reached after a short

impact duration (a).

With a soft screwdriving application (screw-

couplings in soft material such as wood), a longer

impact duration (b) is required.

Recommendation: determine the correct impact

duration by carrying out trial screwdriving.

Caution! With small screws, maximum torque can

be reached even below an impact duration of 0.5

seconds.

- This is why the duration of the screwdriving

process must be monitored exactly.

- Adjust the tightening torque by pressing firmly or

lightly on the trigger (3), ensuring that the screw is

not damaged or that the screw head does not tear

off.

Use only genuine Metabo accessories.

Use only accessories that fulfil the requirements

and specifications listed in these operating instruc-

tions.

See page 4.

AChargers

B Battery packs with different capacity

Only use battery packs with the appropriate

voltage for your power tool.

C Screwdriving bits

D1/2“ tool

For a complete range of accessories, see

www.metabo.com or the catalogue.

7. Use

8. Accessories

Metabo SSW 18 LTX 400 BL 602205800 Инструкция к товару онлайн [9/52] 862458

Похожие устройства