Lavor WT 20 X бак из нержавеющей стали 8.253.0011 Инструкция онлайн [12/76] 863875
![Lavor WT 20 X бак из нержавеющей стали 8.253.0011 Инструкция онлайн [12/76] 863875](/views2/2101706/page12/bgc.png)
•Check that voltage indicated on the rating
plate is the same as the supply voltage.
•These machines are not suitable for vacuu-
ming health endangering dusts or inamma-
ble/explosive substances (like ash and soot).
• Never leave the equipment unattended
whilst in use.
• Never carry out any maintenance on the
machine without rst disconnecting from the
mains supply or when it is left unattended or
reachable by children or disables..
• The power cord should not be used to pull or
lift the machine.
• The machine should never be immersed and
never use water jet against the appliance to cle-
an it.
• When using the machine in wet rooms
(e.g. in the bathroom) only connect it to so-
ckets which are connected in series with a
ground fault circuit interrupter. In case of
doubt, consult an electrician.
• Periodically examine the power cord and
machine for damage. If any damage is found,
do not use the appliance but contact your
service centre for repair.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its service
centres or similarly qualied people in order
to avoid a hazard.
• If an extension cord is used, the plug and so-
cket must be of watertight construction.
• Before vacuuming liquids, check the oat
functions correctly. When vacuuming liquids,
and when the tank is full, a oat closes the suc-
tion opening, and the vacuum operation is inter-
rupted. Then switch o the machine, disconnect
the plug and empty the tank. Regularly clean the
water level limiting device (oat) and examine it
for signs of damages.
•If the machine overturns, it would be recom-
mended to stand it up before switching o.
• If foam or liquid escape from the appliance,
switch o immediately..
• The equipment should not be used to va-
cuum water from containers lavatories, tubs,
etc.
• Aggressive solvents or detergents should
not be used.
•Service and repairs must be carried out by quali-
ed personnel only. Only use manufacturer ori-
ginal spare parts for service repair.
•The manufacturer cannot be held responsible
for any damage/injury caused to persons, ani-
mals or property caused by misuse of the ap-
pliance,
USE
• Be sure that switch is in o position (0) OFF and
connect the machine to a suitable socket.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Insert the suitable lters for the proper use. See
g. (H)(L)(M)(N)(P).
•Never use the appliance without lters .
• Use the most suitable accessories for the reque-
sted usage (E)(F).
• Put switch on (|) ON position in order to start the
machine.
• When job is over, switch o (0) OFF and keep
away the plug from the socket.
• If the appliance is used with especially ne dust
(size below 0.3 µm) the lter supplied will requi-
re cleaning more frequently. For especially de-
manding applications, the use of specic lters
supplied as an optional (Hepa) may be necessa-
ry.
Outlet Models
see g. (G)
To activate the socket-electric tool function, put
switch (4) on (|)ON and switch (5) on (0) OFF.
When a tool is connected the vacuum will
automatically start as the tool is started. The
suction hose will suck directly dust and wood
shavings.
• Even when switches (4) and (5) are (|) ON , the
electric tool socket is live. Not suitable for any
hot items.
CARE AND MAINTENANCE
see g. (Q)(R)
The unit is maintenance-free.
• The machine shall be disconnected from its
power source, by removing the plug from the
socket-outlet, during cleaning or maintenance
• Clean the exterior part of the machine with a
dry cloth.
• Move the appliance only by catching the
carrying handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.
FILTER CLEANING
(see g.
(Q)
)
•
The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
12
Похожие устройства
- Lavor WT 30 XE с розеткой для электроинструмента 8.253.0013 Инструкция
- ARMA 1.8 л, металл, 1500 Вт EKD-1500 Инструкция по эксплуатации
- BBK EK1760S нержавеющая сталь/черный 00-00001078 инструкция
- Brayer 2200 Вт, 1,7 л, покрытие Cool Touch, автоотключение BR1019 Инструкция по эксплуатации
- Galaxy 2000 Вт, 1.7 л 5010103306 Инструкция к товару
- Galaxy LINE GL 0559 7010105590 инструкция
- Galaxy GL 2355 400 Вт 7020323550 инструкция
- Bosch 12 В 06019K1020 Инструкция к Bosch 06019K1020
- Galaxy 7020323820 инструкция
- Galaxy LINE GL 2367 7020323670 Инструкция по эксплуатации
- Ujin Luxe/WiFi/BLE/IR/CO2 D-10000-02 Инструкция по эксплуатации
- Ujin Luxe/WiFi/BLE/IR/CO2 D-10000-02 Сертификат соответствия
- KRAFT 2 т, с гайковертом, в кейсе KT 850001 Инструкция к KRAFT 850001
- KRAFT 2 т, в кейсе KT 850000 Инструкция к KRAFT 850000
- Huter HLS-3,3L 900/70/14/3 Паспорт
- Huter HLS-3,3LS 900/70/14/4 Паспорт
- Huter HLS-5500/52H 70/14/5 Паспорт
- Bosch Pro Pruner 06019K1021 Инструкция к Bosch 06019K1020
- Huter HLS-5500 70/14/1 Паспорт
- Huter HLS-5500Н 70/14/2 Паспорт