Bosch EasyGrassCut 18V-230 06008C1A03 Инструкция к товару онлайн [27/440] 864576

Bosch EasyGrassCut 18V-230 06008C1A03 Инструкция к товару онлайн [27/440] 864576
English | 27
Dismounting the spool, winding up the cutting
line and mounting the spool (see figures J to L)
u Remove the battery before replacing the spool.
Press both latches of the spool cover together and remove
the spool cover (11). Afterwards, remove the empty spool
(12).
Cut off approx. 4.0 m line from the refill roll. Slide one end of
the cutting line into the hole for line wind-up (13) in the
spool and wind up the cutting line uniformly and tightly.
Slide the other end of the cutting line through the hole for
line guiding (14) in the trimmer head and mount the spool
back into the trimmer head. Affix the spool by mounting the
spool cover (11).
Line Feeding (see figure M)
Semi-automatic Line Feeding
The trimmer is equipped with a semi-automatic feeding sys-
tem. The system feeds 10mm of the line with every press of
the on/off switch (4).
Manual Line Feeding
Press the line-feed button (15), and pull the cutting line out
to the desired length.
Troubleshooting
d.c.
Lawn Trimmer/Lawn Edge Trimmer
Problem Possible Cause Corrective Action
Motor refuses to start Battery discharged Recharge battery
Battery too hot/cold Allow to cool/warm
Garden tool functions
intermittently
On/Off switch defective Contact Bosch customer service agent
Internal wiring of garden tool defective Contact Bosch customer service agent
Garden product la-
bours
Grass too high Cut in stages
Garden tool does not
cut
Cutting line too short/broken off Manually feed cutting line
Spool empty Replace line spool
Cutting line can no
longer be fed
Line inside the spool entangled Inspect the spool, rewind if necessary
Spool empty Refill line spool
Cutting line retracts
into spool
Cutting line too short/broken off
Remove spool – rethread line (see figures JL)
Cutting line breaks fre-
quently
Line inside the spool entangled
Remove spool – rewind line (see figures JL)
Trimmer used incorrectly Only trim with the tip of the line, avoid stones,
walls and other hard objects. Feed the line regu-
larly to maintain full cutting diameter.
Heavy vibrations Cutting line broken
Cutting system damaged
Grass between spool housing and line-feed but-
ton
Grass in hole for line feed
Pull out cutting line with manual feed (see figure
M)
Contact Bosch customer service agent
Disassemble spool cover and remove grass
Remove grass from hole for line feed
Battery and charger
Problem Possible Cause Corrective Action
Flashing red battery
charge indicator
No charging procedure
possible
Battery not (properly) inserted Properly insert battery in charger
Battery contacts contaminated Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery
Battery defective Replace the battery
Bosch Power Tools F 016 L94 299 | (22.07.2021)

Похожие устройства

Скачать