Home
Главная
Ryobi
С верхним положением двигателя
RBC1226i 5133002506
Инструкция к Ryobi RBC1226i Страница: 4

Ryobi RBC1226i 5133002506 Инструкция к Ryobi RBC1226i онлайн [4/248] 864863

2 | English

or H05 VV-F”. Check it before every use

for damage. Always uncoil it during use

because coiled cables can overheat.

Damaged extension cables should not be

repaired; they should be replaced with an

equivalent type.

■ Do not use the product if the electric cables

are damaged or worn.

■ If the power cord or extension cable

becomes damaged during use, disconnect

from the power supply immediately. Do not

touch the electric cables until the power

supply has been disconnected.

■ Make sure the power cord is positioned so

that it cannot be damaged by the cutting

means and will not be stepped on, tripped

over or otherwise subjected to damage or

stress.

■ Never pick up or carry the product by the

power cord.

■ Never pull by the power cord to disconnect

from the power supply.

■ Keep the power cord away from heat, oil

and sharp edges.

■ Make sure the voltage is correct for the

product. A nameplate on the product

indicates the product’s voltage. Never

connect the product to an AC voltage that

differs from this voltage.

■ Make sure the switch is in Off position

before disconnecting from power supply.

PREPARATION

■ Wear full eye and hearing protection while

operating the product. If working in an area

where there is a risk of falling objects, head

protection must be worn.

■ Hearing protection may restrict the

operator’s ability to hear warning sounds.

Pay particular attention to potential hazards

around and inside the working area.

■ Wear heavy long trousers, boots, and

gloves. Do not wear loose fitting clothing,

short trousers, jewellery of any kind, or use

with bare feet.

■ Secure long hair so it is above shoulder

level to prevent entanglement in moving

parts.

■ Before use and after any impact, check that

there are no damaged parts. A defective

switch or any part that is damaged or worn

should be properly repaired or replaced by

an authorised service facility.

■ Make sure the cutting attachment is

properly installed and securely fastened.

■ Never operate the product unless all

guards, deflectors and handles are properly

and securely attached.

■ Consider the environment in which you are

working. Keep the working area free from

wires, sticks, stones and debris, which if

struck by the cutter, can become thrown

objects.

GENERAL SAFETY WARNINGS

WARNING

Read all safety warnings and all

instructions. Failure to follow the warnings

and instructions may result in electric shock,

ﬁ re and/or serious injury.

Save all warnings and instructions for

future reference.

The term “power tool’’ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

WORK AREA SAFETY

■ Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

■ Do not operate power tools in explosive

atmospheres, such as in the presence

of flammable liquids, gases or dust.

Power tools create sparks which may ignite

the dust or fumes.

■ Keep children and bystanders away

while operating a power tool. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

■ Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodified

plugs and matching outlets will reduce risk

of electric shock.

■ Avoid body contact with earthed or

grounded surfaces, such as pipes,

Ryobi RBC1226i 5133002506 Инструкция к Ryobi RBC1226i онлайн [4/248] 864863

Похожие устройства