Ryobi RLT5127 5133003639 Инструкция к Ryobi RLT6130 5133003641 онлайн [4/156] 864866
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ryobi RLT5127 5133003639 Инструкция к Ryobi RLT6130 5133003641 онлайн [4/156] 864866

Ryobi RLT5127 5133003639 Инструкция к Ryobi RLT6130 5133003641 онлайн [4/156] 864866
2 | English
■ Hearing protection may restrict the operator’s ability
to hear warning sounds. Pay particular attention to
potential hazards around and inside the working area.
■ Wear heavy, long trousers, boots, and gloves. Do not
wear loose fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
■ Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■ Before use and after any impact, check that there are
no damaged parts. A defective switch or any part that
is damaged or worn should be properly repaired or
replaced by an authorised service facility.
■ Make sure the cutting attachment is properly installed
and securely fastened.
■ Never operate the product unless all guards, deflectors
and handles are properly and securely attached.
■ Consider the environment in which you are working.
Keep the working area free from wires, sticks, stones
and debris, which if struck by the cutter, can become
thrown objects.
ELECTRIC LAWN TRIMMER / EDGE TRIMMER
SAFETY WARNINGS
■
Never allow children or people unfamiliar with these
instructions to use the product. Local regulations may
restrict the age of the operator.
■ Use the product in daylight or with good artificial light.
■ Avoid using on wet grass.
■ Do not walk backwards when using the product.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance. Always be
sure of your footing on slopes. Walk, never run.
■ Keep bystanders, children and pets 15 m away from
the area of operation. Stop the product if anyone enters
the area.
■ Keep the cutting attachment below waist level.
■ Never operate the product with damaged guards or
without guards in place.
■ Never fit a metal replacement line.
■ Keep hands and feet away from the cutting means at all
times, especially when switching on the motor.
■ Beware, the cutting elements continue to rotate after
the motor is switched off.
■ Beware of objects thrown by the cutting means. Clear
debris like small stones, gravel and other foreign
objects from the work area before starting operation.
Wires or string may become entangled with the cutting
means.
■ Turn off the product and disconnect from the power
supply. Make sure all moving parts have come to a
complete stop:
● before servicing
● before clearing a blockage
● before checking, cleaning, and working on the
product
● before changing accessories
● after striking a foreign object
● whenever leaving the product unattended
● whenever performing maintenance
● whenever the product starts to vibrate abnormally
■ The small blade fitted to the lawn guard is designed to
trim the new extended line to the correct length for safe
and optimum performance. It is very sharp; do not touch
it, particularly when cleaning the product.
■ Always ensure that ventilation openings are kept clear
of debris.
■ Make sure the cutting head attachment is properly
installed and securely fastened.
■ Make sure all guards, deflectors, and handles are
properly and securely attached.
■ Do not modify the product in any way. This may
increase the risk of injury to yourself or others.
■ Use only the manufacturer’s replacement cutting line.
Do not use any other cutting attachment.
■ Immediately switch off and disconnect from the mains
in the event of accident or breakdown. Don’t operate
the product again until it has been fully checked by an
authorised service centre.
■ Ensure that the line cut-off blade in guard is properly
positioned and secured before each use.
■ If the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.
■ Before every use, examine the supply cord for damage.
If there are signs of damage, it must be replaced by
a qualified person at an authorised service centre to
avoid hazard.
TRANSPORTATION AND STORAGE
■
Stop the product and allow it to cool down before
storing or transporting. Always disconnect from the
power supply and wind the cable to prevent damage.
■ Clean all foreign materials from the product. Store it in
a cool, dry and well-ventilated place that is inaccessible
to children. Keep away from corrosive agents, such
as garden chemicals and de-icing salts. Do not store
outdoors.
■ For transportation in vehicles, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, contribute to poor performance,
and may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service, bring the product to the nearest
authorised service centre for repair. When servicing, use
only original replacement parts.

Похожие устройства

Скачать