Hilti SIW 9-A22 2107759 Инструкция к товару онлайн [13/196] 865099

*2113750*

2113750 English 7

Sound power level (L

)

109.5 dB(A)

Uncertainty for the sound power level (K

)

3 dB(A)

Total vibration

Vibration emission value when tightening screws/bolts and nuts of the

maximum permitted size (a

)

7 m/s²

Uncertainty (K)

1.5 m/s²

5 Preparations at the workplace

5.1 Charging the battery

1. Before charging the battery, read the operating instructions for the charger.

2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.

3. Use an approved charger to charge the battery.

5.2 Inserting the battery

CAUTION

Risk of injury by short circuit or falling battery!

▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product

are free of foreign matter.

▶ Make sure that the battery always engages correctly.

1. Charge the battery fully before using it for the first time.

2. Push the battery into the battery holder until it engages with an audible click.

3. Check that the battery is seated securely.

5.3 Removing the battery

1. Press the battery release buttons.

2. Remove the battery from the tool.

5.4 Fitting the socket 2

CAUTION

Risk of injury through use of the wrong type of accessory tool!

▶ Use only accessory tools of the locking type.

▶ Do not use worn or damaged accessory tools.

CAUTION

Risk of injury By worn or damaged locking ring

▶ Never use a worn or damaged locking ring.

1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.

2. Place the socket on the square drive spindle of the tool.

Turn the socket until the hole in the recess of the socket is in line with the hole in the square drive

spindle.