Metabo SSW 18 LTX 400 BL SE 602255850 SSW 18 LTX 400 BL SE онлайн [11/64] 865235

ENGLISH en

Mount the machine on the screw, ensuring it is

aligned straight.

The screwdriving process has two elements:

inserting the screw and

tightening the screw with the percussion mech-

anism.

The tightening torque depends on the impact dura-

tion.

With an impact duration of approx. 5 seconds, the

maximum tightening torque has been reached.

The torque curve depends on the type of applica-

tion:

With a hard screwdriving application (screw-

couplings in hard material such as metal), maximum

tightening torque is already reached after a short

impact duration (a).

With a soft screwdriving application (screw-

couplings in soft material such as wood), a longer

impact duration (b) is required.

Recommendation: determine the correct impact

duration by carrying out trial screwdriving.

Caution! With small screws, maximum torque can

be reached even below an impact duration of 0.5

seconds.

- This is why the duration of the screwdriving

process must be monitored exactly.

- Adjust the tightening torque by pressing firmly or

lightly on the trigger (3), ensuring that the screw is

not damaged or that the screw head does not tear

off.

Use only original Metabo or CAS (Cordless Alliance

System) battery packs and accessories.

Use only accessories that fulfil the requirements

and specifications listed in these operating instruc-

tions.

See page 4.

AChargers

B Battery packs with different capacity

Only use battery packs with the appropriate

voltage for your power tool.

CScrewdriving bits

D1/2“ tool

For a complete range of accessories, see

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Battery packs must not be disposed of with regular

waste. Return faulty or used battery packs to your

Metabo dealer!

Do not allow battery packs to come into contact with

water!

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2012/

19/EU on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Before disposal, discharge the battery pack in the

power tool. Prevent the contacts from short-circu-

iting (e. g. by protecting them with adhesive tape).

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

U =Voltage of battery pack

=No-load speed

s=Impact frequency

H =Machine tool attachment

m =Weight (with smallest battery pack)

max.

=max. tightening torque

Measured values determined in conformity with

EN 62841.

Permitted ambient temperature during operation: -

20 °C bis 50 °C (limited performance with

temperatures below 0 °C). Permitted ambient

temperature for storage: 0 °C to 30 °C

Direct current

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

Emission values

Using these values, you can estimate the

emissions from this power tool and compare these

with the values emitted by other power tools. The

actual values may be higher or lower, depending on

the particular application and the condition of the

tool or power tool. In estimating the values, you

should also include work breaks and periods of low

use. Based on the estimated emission values,

specify protective measures for the user - for

7. Use

8. Accessories

9. Repairs

10. Environmental Protection

11. Technical specifications

Metabo SSW 18 LTX 400 BL SE 602255850 SSW 18 LTX 400 BL SE онлайн [11/64] 865235

Похожие устройства