Piusi K900 METER 3in BSP F0049900B Инструкция онлайн [34/60] 865689
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Piusi K900 METER 3in BSP F0049900B Инструкция онлайн [34/60] 865689

Piusi K900 METER 3in BSP F0049900B Инструкция онлайн [34/60] 865689
M0158B IT | en
34 /6 0
Installation, use and maintenance
D SAFETY INSTRUCTIONS
D1 SAFETY WARNINGS
Mains - pre-
liminary checks
before installation
ATTENTION
You must avoid any contact between the electrical power supply and the fluid that needs
to be FILTERED.
Maintenance
control
Before any checks or maintenance work are carried out, disconnect the
power source.
For your safety,
review the major
aentions and
cautions below
before operating
your meter
When metering flammable liquids, observe precautions against fire or explo-
sion
When handling hazardous liquids, always follow the liquid manifacturer’s safety
precautions
Always dispose of used cleaning solvents in a safe manner according to the
solvent manifacturer’s instructions.
During meter removal, liquid may spill. Follow the liquid manifacturer’s safety
precautions to clean up minor spills
Do not blow compressed air through the meter
Do not allow liquids to dry inside the meter
FIRE AND
EXPLOSION
When flammable
fluids are present
in the work area,
such as gasoline
and windshield
wiper fluid, be
aware that flam-
mable fumes can
ignite or explode.
To help prevent
fire and explosion:
Use equipment only in will ventilated area.
Eliminate all ignition sources such as cigarettes and portable lamps.
Keep work area free of debris, including rags and spilled or open containers of
solvent and gasoline.
Do not plug or unplug power cords or turn lights on or off when flammable
fumes are present.
Ground all equipment in the work area.
Stop operation immediately if static sparking occurs or if you feel a shock. Do not use
equipment until you identify and correct the problem.
Keep a working fire extinguisher in the work area.
EQUIPMENT
MISUSE
Misuse can cause
death or serious
injury
!
Do not operate the unit when fatigued or under the influence of drugs or al-
cohol.
Do not leave the work area while equipment is energized or under pressure.
Turn off all equipment when equipment is not in use.
Do not alter or modify equipment. Alterations or modifications may void agen-
cy approvals and create safety hazards.
Route hoses and cables away from traffic areas, sharp edges, moving parts,
and hot surfaces.
Do not kink or over bend hoses or use hoses to pull equipment.
Keep children and animals away from work area.
Comply with all applicable safety regulations.
Toxic Fluid or
Fumes Hazard
Read MSDS’s to know the specific hazards of the fluids you are using.
Store hazardous fluid in approved containers, and dispose of it according to
applicable guidelines.
Prolonged contact with the treated product may cause skin irritation: always
wear protective gloves during dispensing.

Похожие устройства

Скачать