AM.PM Inspire 2.0 180х80 A0 W52A-180-080W-A инструкция онлайн [3/24] 867218

AM.PM Inspire 2.0 180х80 A0 W52A-180-080W-A инструкция онлайн [3/24] 867218

3

English

Before using, it is necessary to connect

to the sewer (the device drain-overflow

is not included into delivery set).

To prevent moisture under the bath, the

joints between the bath and the wall

must be sealed with sanitary silicone.

Fill the bath by ¾ of the volume and seal

the joints between bath and the wall

with a silicone sealant (not included in

delivery set). It is better to use sealant

that meets the properties of PH-

neutrality, colorlessness.

Attention!

Sealant needs some time to harden. It

is forbidden to use item within 24 hours

after installation.

In the case if installation of a bathtub or

installation near the bathtub wares in

such a way to the bath for maintenance

and repair will be limited, work to ensure

should be payed by the consumer!

Product

maintenance

Attention!

For correct operation of the system

it is required to install puriification

filters at feed pipelines with degree of

purification of 100-300 micron.

• For the avoidance of damage of the

surface of the product it is not allowed

to use water of temperature more

than 60°С.

• Use only mild detergents and soap for

cleaning of the item.

• Do not use corrosive washing agents or

abrasive pastes for cleaning of the item.

• Accute contamination on the surface

is reccomended to treat with diluted

vinigar and wash o with water.

• Shallow scratches (for acrylic parts

ofthe item) can be removed with ne

grid sandpaper (grade 2000).

Producer has a right to introduce

change of component parts that has

noeect on appearance and functional-

ity of product. All parameters indicated

in this instruction have formal meaning.

Producer reserves the right for technical

changes.

Похожие устройства