Bosch GKF 600 0.601.60A.101 Инструкция к товару онлайн [16/197] 867598

Bosch GKF 600 0.601.60A.101 Инструкция к товару онлайн [16/197] 867598

English | 15

2 609 140 541 • 22.1.08

21 Wing bolt for parallel guide

22 Roller guide

23 Wing bolt for horizontal alignment of the

roller guide

24 Wing bolt for locking of the horizontal

alignment

25 Base cover sleeve*

26 Tilt base*

27 Wing bolt for angle adjustment

28 Scale for routing angle adjustment

29 Handle*

30 Extraction hood*

31 Extraction adapter*

32 Side-handle subbase*

* Illustrated or described accessories are not included

as standard delivery.

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

Save all warnings and instructions for future

reference.

Additionally, the general safety instructions ei-

ther in the enclosed booklet or those added in

the centre of these operating instructions must

be observed.

■ The allowable speed of the tool insert

must be at least as high as the maximum

speed stated on the machine. Accessories

driven in excess of their allowable speed can

be destroyed.

■ Routing tools or other tool inserts must fit

exactly in the tool holder (collet) of your

machine. Tool inserts that do not fit precisely

in the tool holder of the machine rotate irreg-

ularly, vibrate heavily and can lead to loss of

control.

■ Guide the machine against the workpiece

only when it is switched on. Otherwise

there may be danger of kickback when the

tool insert jams in the workpiece.

■ Keep your hands away from the routing

area and the routing tool. Hold the auxil-

iary handle or the motor housing with

your second hand. When both hands hold

the machine, they cannot be injured by the

routing tool.

■ Never cut over metal objects, nails or

screws. The routing tool can become dam-

aged and lead to increased vibrations.

■ Hold the power tool only by the insulated

gripping surfaces when performing an op-

eration where the cutting tool may contact

hidden wiring or its own power cord. Con-

tact with a “live” wire will also make exposed

metal parts of the power tool “live” and shock

the operator.

■ Use suitable detectors to determine if util-

ity lines are hidden in the work area or call

the local utility company for assistance.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes

property damage or may cause an electric

shock.

■ Do not use dull or damaged router bits.

Dull or damaged router bits cause increased

friction, can become jammed and lead to im-

balance.

■ Secure the workpiece. A workpiece

clamped with clamping devices or in a vice is

held more securely than by hand.

■ Do not work materials containing asbes-

tos. Asbestos is considered carcinogenic.

■ Take protective measures when dust can

develop during working that is harmful to

one’s health, combustible or explosive.

Example: Some dusts are regarded as carci-

nogenic. Wear a dust mask and work with

dust/chip extraction when connectable.

■ Always wait until the machine has come to

a complete stop before placing it down.

The tool insert can jam and lead to loss of

control over the power tool.

■ Do not use a machine with a damaged

mains cable. Do not touch the damaged

cable and pull the mains plug when the ca-

ble is damaged while working. Damaged

cables increase the risk of an electric shock.

For Your Safety

Похожие устройства