Home
Главная
Al-Ko
Роботы-газонокосилки
ROBOLINHO 500 W 119925
Инструкция к AL-KO Robolinho 500 I 119834 Страница: 58

Al-Ko ROBOLINHO 500 W 119925 Инструкция к AL-KO Robolinho 500 I 119834 онлайн [58/504] 868064

58 Robolinho

Help in case of malfunction

4. Put the cover back on and fasten the screws.

13 HELP IN CASE OF MALFUNCTION

13.1 Correcting appliance and handling

faults

CAUTION! Risk of injury. Sharp-edged

and moving appliance parts can lead to injury.

■

Always wear protective gloves during mainte-

nance, care and cleaning work.

NOTE For malfunctions that are not listed

in this table or that you cannot resolve yourself,

please contact our customer service.

Malfunction Cause Remedy

The appliance does not

start.

Rechargeable battery is flat. Charge the appliance in the base sta-

tion.

The appliance gets stuck

and has dug itself in. The

wheels continue to turn.

Bump sensors do not trigger. Contact an AL-KO service centre.

The grass is too high.

■

Increase the cutting height, then

lower in stages to the required

height.

■

Mow the grass short with a lawn

mower.

The appliance sits on an un-

evenness of the grass sur-

face.

Eliminate the unevenness.

The appliance mows at the

wrong time.

The appliance has the incor-

rect time.

Set the time.

The mowing duration is in-

correctly set.

Set the mowing times.

The appliance loses the time

settings.

The rechargeable battery is defective.

Contact an AL-KO service centre.

Motor stops during mow-

ing.

Motor is overloaded. Switch off the appliance, set on level

ground or shorter grass and restart.

Rechargeable battery is flat. Charge the rechargeable battery.

The cutting blades are blunt. Turn over or replace cutting blades if

necessary.

Mowing result is uneven. Mowing time is too short. Program longer mowing times.

Mowing area is too large. Reduce the mowing area.

Cutting height level is too

low.

Increase the cutting height, then lower

in stages to the required height.

The cutting blades are blunt. Turn over or replace cutting blades if

necessary.

Al-Ko ROBOLINHO 500 W 119925 Инструкция к AL-KO Robolinho 500 I 119834 онлайн [58/504] 868064

Похожие устройства