Noblelift ACL30 540x1800mm PU+PU, tandem 1305401800 Инструкция к товару онлайн [15/20] 869011

h. Malfunctions

If there are any malfunctions or the truck is inoperative, please stop using it. Place the truck at

a safe place. Avoid further usage.

Inform immediately the manager and, or call your service.

7. REGULAR MAINTENANCE

 Only qualified and trained personnel are allowed to do service on this truck.

 Before servicing the truck, remove the load and lower the forks to the lowest position.

 Completely immobilize pallet truck before working on components that might pinch

fingers or hands if movement were allowed.

 Use approved and from your dealer released original spare parts.

 Please consider that oil leakage of hydraulic fluid can cause failures and accidents.

 It is allowed to adjust the pressure valve only from trained service technicians.

 Waste material like oil, used batteries or other must be probably disposed and recycled

according to the national regulations and if necessary brought to a recycling company.

 All bushings and bearings have been lubricated at the factory. To increase their life,

regular maintenance is recommended. Using the appropriate grease for the application

and lubricate each grease fitting every 6 months.

 Harsh environments may require more frequent maintenance.

If you need to change the wheels, please follow the instructions above. The wheels must be

round and they should have no abnormal abrasion.

a. Maintenance

DAILY

 Follow chapter 5.

MONTHLY

 Check hydraulic oil level (more frequently for high use applications).

 All bearings and shafts are provided with long-life grease at the factory. Long-life grease

should be applied to the lubrication points at monthly intervals or after each time the truck is

cleaned. Clean off dirt and debris.

EVERY SIX MONTH

 Change oil (more frequently if color has substantially darkened or feels gritty). The required

hydraulic fluid type is ISO VG32, its viscosity should be 30cSt at 40°C, total volume is about

0.3l.

NOTE: If hydraulic oil is milky white in color, water is in the hydraulic system. Change the

hydraulic oil immediately.

Before starting operating the truck, ensure that all markings and decals are on the right

place and not damaged (acc. to Fig. 3). If necessary replace the decals.