Noblelift ACR 20R1000 1000x1150, PU+PU, tandem 120100115 Инструкция к товару онлайн [14/20] 869017

c. Lowering

DO NOT PUT FOOT OR HAND UNDER THE LIFTING MECHANISM.

Lower the load by shift the operating lever up to the lowering position carefully. By releasing the

lever, the lowering movement will stop. Ensure there is adequate clearance behind, then move

the pallet truck away.

d. Moving

 Do not operate the truck on a slope or inclined surface.

 Watch difference of floor level when moving lifter. Load could fall down

 Make the load stable to prevent it from falling down.

 The truck might be not equipped with a brake. In this case the braking distance is

longer and depends on the operator.

If equipped, release the brake.

Move the truck by pushing or pulling the tiller arm. The tiller arm is connected to the steering

rollers. The wheels are steered automatically by moving or steering the tiller arm.

e. Parking-/ Footbrake (optional for some models)

Follow these instructions, if a parking-/footbrake is equipped with the truck (Fig. 1, pos. 8).

To apply the brake step on the “LOCK” side of the pedal (Fig. 9, pos.345) until its angle is 45

To release the brake step on the “MOVE” side of the pedal (Fig. 9, pos.345) until it is in

horizontal position.

f. Progressive drive- and parking brake (optional for some models)

Follow these instructions, if a progressive drive- and parking brake is

equipped with the truck (Fig. 1, pos. 9). By pulling the lever of the

progressive parking and foot brake, the truck will brake smoothly to the

desired adjustment. To park the truck, after fully pulling the lever, the

small latch on the braking lever must be moved to the right, then the

operator can release the lever. By start operating, the truck, pull the

lever and then swing the latch to the left side, then release the lever.

Depending on the load conditions the braking behavior is changing.

Please do not overstress the brake, it could generate loss in

braking capacity.

g. Quick Lift (optional for some models)

When the load is less than 120kg, the pallet truck has the quick-lifting function. It is about 5

times pumping to lift truck from the min. height to max. height. When the load is more than

120kg, the pumping function will automatically switch to a normal lifting speed.

Fig. 12: Lever drive-

and parking brake