Home
Главная
Bosch
Дисковые
GKS 185-LI (Соло) 06016C1221
Инструкция по эксплуатации Страница: 16

Bosch GKS 185-LI (Соло) 06016C1221 Инструкция по эксплуатации онлайн [16/269] 869584

16 | English

cuts”. Raise the lower guard by the retracting handle

and as soon as the blade enters the material, the lower

guard must be released.For all other sawing, the lower

guard should operate automatically.

u Always observe that the lower guard is covering the

blade before placing the saw down on bench or

floor.An unprotected, coasting blade will cause the saw

to walk backwards, cutting whatever is in its path. Be

aware of the time it takes for the blade to stop after

switch is released.

Additional safety warnings

u Do not allow the chip ejector to come into contact with

your hands. You may be injured by rotating parts.

u Do not use the saw above the level of your head. Doing

so will mean you have inadequate control of the power

tool.

u Use suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

u Hold the power tool firmly with both hands and make

sure you have a stable footing. The power tool can be

more securely guided with both hands.

u Do not operate the power tool when stationary . It is

not suitable for operation with a saw table.

u When performing plunge cuts which are not right-

angled, secure the guide plate of the saw so that it will

not shift sideways.In the event of a sideways shift, the

saw blade may become jammed, which could lead to kick-

back.

u Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

u Always wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

u Do not use HSS saw blades. Such saw blades can easily

break.

u Do not saw any ferrous metals. Hot chips may ignite the

dust extractor.

u Wear a dust mask.

u In case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

u Do not open the battery. There is a risk of short-circuit-

ing.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Only use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for making straight cuts in wood

with and against the grain and mitre cuts in wood while rest-

ing firmly against the workpiece.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

On/off switch

(2)

Lock-off function for on/off switch

(3)

Cover for utility hook

(4)

Spindle lock button

(5)

Auxiliary handle

(6)

Wing bolt for parallel guide

(7)

Clamping lever for cutting depth preselection

(8)

Scale for mitre/bevel angles

(9)

Clamping lever for mitre/bevel angle preselection

(10)

Worklight

(11)

45° cut mark

(12)

0° cut mark

(13)

Parallel guide

(14)

Retracting blade guard

(15)

Base plate

(16)

Adjusting lever for retracting blade guard

(17)

Protective guard

(18)

Chip ejector

(19)

Rechargeable battery

(20)

Cutting depth scale

(21)

Rechargeable battery release button

(22)

Saw spindle

(23)

Mounting flange

(24)

Circular saw blade

1 609 92A 74Z | (11.05.2022) Bosch Power Tools

Bosch GKS 185-LI (Соло) 06016C1221 Инструкция по эксплуатации онлайн [16/269] 869584

Похожие устройства