Home
Главная
Bosch
Безударные
GSR 185-LI (соло) 06019K3003
Инструкция по эксплуатации Страница: 18

Bosch GSR 185-LI (соло) 06019K3003 Инструкция по эксплуатации онлайн [18/241] 870311

18 | English

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Changing the tool (see figure A)

u Remove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

The drill spindle is locked when the on/off switch (10) is not

pressed. This makes it possible to change the application

tool in the drill chuck quickly, conveniently and easily.

Open the keyless chuck (2) by turning it in the direction of

rotation ➊ until the tool can be inserted. Insert the tool.

Firmly tighten the keyless chuck (2) by turning it by hand in

the direction of rotation ➋. This will automatically lock the

drill chuck.

Dust/Chip Extraction

Dust from materials such as lead-containing coatings, some

wood types, minerals and metal can be harmful to one’s

health. Touching or breathing-in the dust can cause allergic

reactions and/or lead to respiratory infections of the user or

bystanders.

Certain dust, such as oak or beech dust, is considered carci-

nogenic, especially in connection with wood-treatment ad-

ditives (chromate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the ma-

terials to be worked.

u Avoid dust accumulation at the workplace. Dust can

easily ignite.

Operation

Starting Operation

Inserting the battery

Note: The use of batteries unsuitable for your power tool can

lead to malfunctions or damage to the power tool.

Push the charged battery (6) into the base of the power tool

from the front until the battery is securely locked.

Setting the rotational direction (see figureB)

u Only operate the rotational direction switch (9) when

the power tool is not in use.

The rotational direction switch (9) is used to change the ro-

tational direction of the power tool. However, this is not pos-

sible while the on/off switch (10) is being pressed.

Right rotation: To drill and to drive in screws, press the

rotational direction switch (9) through to the left stop.

Left Rotation: To loosen and unscrew screws and nuts,

press the rotational direction switch (9) through to the right

stop.

Setting the operating mode

Drilling

GSR 185-LI

Set the torque presetting ring(3) to the

"drilling" symbol.

GSB 185-LI

Set the operating mode presetting ring(4) to

the "drilling" symbol.

Screwdriving

GSR 185-LI

Set the torque presetting ring(3) to the re-

quired torque.

GSB 185-LI

Set the operating mode presetting ring(4) to

the "screwdriving" symbol.

Set the torque presetting ring(3) to the re-

quired torque.

Impact drilling

GSB 185-LI

Set the operating mode presetting ring(4) to

the "impact drilling" symbol.

Switching on/off

To start the power tool, press and hold the on/off switch

(10).

The LED (8) lights up when the on/off switch (10) is lightly

or fully pressed, meaning that the work area is illuminated in

poor lighting conditions.

To switch off the power tool, release the on/off switch (10).

LED worklight with status indicator

The LED worklight(8) is used as a status indic-

ator for device protection and low battery

status:

LED

Feedback

Description

Flashing light 3x

during operation

Battery status is low.

The voltage level of the battery has fallen

below the optimum value. The perform-

ance of the device is restricted.

Flashing light 3x

during downtime

Device protection is active.

Device protection has been activated to

prevent the battery from consuming a

large amount of power and to protect the

device against damage.

– If the battery status is low, charge the battery(6) or re-

place the weak battery with a fully charged battery.

Adjusting the speed

You can adjust the speed of the power tool when it is on by

pressing in the on/off switch (10) to varying extents.

A light pressure on the on/off switch (10) results in a low ro-

tational speed. Increased pressure on the switch causes an

increase in speed.

1 609 92A 8JT | (03.02.2023) Bosch Power Tools

Bosch GSR 185-LI (соло) 06019K3003 Инструкция по эксплуатации онлайн [18/241] 870311

Похожие устройства