Home
Главная
Dreame Trouver
Пылесосы вертикальные
J20
Руководство по эксплуатации Страница: 16

Dreame Trouver J20 Руководство по эксплуатации онлайн [16/28] 874517

Dreame Trouver J20 Руководство по эксплуатации онлайн [16/28] 874517

Wipe the vacuum cleaner with soft, dry

cloth.

Cleaning the vacuum cleaner

1.Press the dust cup release button, and

remove the cup from the vacuum cleaner.

2.Hold the separator, and rotate it

clockwise to remove it from the vacuum

cleaner.

3.Remove the air inlet ﬁlter from the

cyclone separator.

4.Rinse the cyclone assembly, air inlet

ﬁlter, and dust cup until they are clean.

After cleaning, dry it by air for at least

24 hours.

Fig.E1-E3

Attention: Please clean the dust cup as

required.

It is recommended to clean the cyclone

system and air inlet ﬁlter at least once

every 3-4 months.

Installation of dust cup, air inlet

ﬁlter, and cyclone separator

assembly

1.Put the inlet ﬁlter back into the cyclone

separator.

Fig.E4-E6

Cleaning air outlet ﬁlter

1.Open the cover plate of air outlet ﬁlter

2.Take out the air outlet ﬁlter

3.Rinse the air outlet ﬁlter with clean

water, and after it is cleaned, dry it by

air for at least 24 hours.

Fig.E8-E10

Cleaning illumination

multi-surface brush

1.Toggle the lock knob of the roller brush

in the arrow direction and lift the roller

pressing plate at the same time, and

then take out the roller brush.

2.Cut oﬀ the hair and ﬁber adhering to the

brush roller with scissors, and wipe up

the dust from the groove and transparent

cover with dry cloth or tissue. Wipe it up

completely before use.

3.Rinse the brush roller, if it is dirty, with

clean water until it is clean.

4.Stand the brush roller upright for at least

24 hours until it is dry completely.

Fig.E11-E14

disconnected and the power button of

the vacuum cleaner has been left in the

“OFF” position.

If the vacuum cleaner is not used for a

long time, please fully charge it,

unplug the power cord, take out the

battery, and store it in a cool and low -

humidity environment, avoiding direct

sunlight. To avoid excessive battery

discharging, please charge the battery

at least once every three months.

Clean the dust cup, air inlet

ﬁlter, and cyclone separator

assembly.

2.Hold the cyclone separator, and rotate

it counterclockwise onto the vacuum

cleaner.

3.Align the dust cup with the slot on the

vacuum cleaner, and rotate it slowly

until the dust cup clicks into place.

5

Похожие устройства

Случайные обсуждения

Ответы 0

Где приобрести присоску на воздухозаборник?

4 месяца назад