Philips GC7920/20 Руководство по эксплуатации онлайн [5/138] 875312

Ironing

1 Place the appliance on a stable and even surface.

Note: In order to ensure safe ironing we recommend to always place the base on a stable ironing board,

a table, or the oor.

2 Make sure that there is enough water in the water tank.

3 Remove the water supply hose from the storage compartment.

4 Put the mains plug in an earthed wall socket and press the on/o button to switch on the appliance

(Fig.6). Wait until the ‘iron ready’ light lights up continuously (Fig. 7). This takes about 2 minutes.

5 Press the carry lock release button to unlock the iron from the iron platform (Fig. 8).

6 Press and hold the steam trigger to start ironing (Fig. 9).

Note: When you start your ironing session and especially during the rst usage of steam trigger, it may

take more than 30 seconds for steam to come out of the appliance.

Note: The pump is activated each time you press the steam trigger. It produces subtle rattling sound.

When there is no water in the water tank, the pump sound is louder.

7 For best ironing results, after ironing with steam, perform the last strokes without steam.

Note: If you do not release the trigger early enough and lift the iron to the base, you might notice that

steam still comes out, which is normal. To avoid that eect, we recommand you to leave the iron on the

board while rearranging the garment.

Warning:Neverdirectsteamatpeople.

MAXmodefunction

For more powerful steam, you can use the MAX steam mode, which is safe on all ironable fabrics.

For fabrics such as cotton, jeans and linen, you are recommended to use the MAX steam mode.

1 Press and hold the on/o button for 2 seconds until the light turns white.

2 To deactivate the MAX mode, press and hold the on/o button for 2 seconds again until the light turns

blue.

Steamboostfunction

1 Press the steam trigger twice quickly to release a powerful boost of steam for 3 seconds (Fig. 10).

Note: It is recommended to use the steam boost function only for stubborn crease.

Verticalironing

Warning:Hotsteamisemittedfromtheiron.Neverattempttoremovewrinklesfromagarment

whilesomeoneiswearingit(Fig.11).Donotapplysteamnearyourorsomeoneelse’shand.

You can use the steam iron in vertical position to remove wrinkles from hanging fabrics.

1 Hold the iron in vertical position, press the steam trigger and touch the garment lightly with the soleplate

and move the iron up and down (Fig. 12).

Saferest

Restingtheironwhilerearrangingyourgarment

While rearranging your garment, you can rest the iron either on the iron platform or horizontally on the

ironing board (Fig.13). The OptimalTEMP technology ensures the soleplate will not damage the ironing

board cover.

Autoshut-o

- The appliances enters the standby mode if it has not been used for 5 minutes. The light of the on/o

button starts to ash.

- To activate the appliance again, press the on/o button or the steam trigger. The appliance starts to heat

up again.

English