Brayer BR4978 Руководство по эксплуатации онлайн [7/36] 875510
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR4978 Руководство по эксплуатации онлайн [7/36] 875510

Brayer BR4978 Руководство по эксплуатации онлайн [7/36] 875510
7
EN
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains. No additional settings
required when using the device in the mains with 60
Hz frequency.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
REMOTE CONTROL (16)
ATTENTION! A lithium battery is used in the remote
control. To avoid danger, do not allow children to play
with the battery. If your child has swallowed a battery,
immediately see a doctor.
Battery installation/replacing
• Press on the clamp and remove the battery holder
(15) from the remote control (16) body, insert a
CR2025 battery (are not included) into the holder,
strictly following the polarity.
• Install the battery holder (15) into the remote control
(16).
Notes:
- replace the battery in time;
- do not recharge the lithium battery;
- remove the battery if you are not planning to use
the unit for a long time;
- remove the used battery from the remote control
(16) and dispose of it.
• When you use the remote control, direct it to the front
part of the fan body.
• The distance between the remote control and the fan
should not exceed 5 m, the coverage angle should
be up to 30 degrees.
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.
FAN USAGE
• Use the handle (5) to carry the fan.
• Place the fan Base (1) on a at, dry and steady
surface.
• Do not place the fan on soft surfaces, such as
carpets with high pile, sofas, or beds.
• Insert the power cord plug into the mains socket

Похожие устройства

Скачать