Zalman CNPS2005-Plus Инструкция по эксплуатации онлайн [6/6] 104976

- 5 -

󳀌

The specifications of the cooler may change without prior notice to improve the performance thereof.

󳀭 For more information on this product, visit our homepage at www.zalman.co.kr. 󳀭

3. Setting the Fan Operation Mode

1) Silent Mode

① Connect the noiseless connector (RCXX) to the FB123 fan’s 3-pin connector. Then, connect

the noiseless connector to the motherboard’s CPU fan connector (3-pin) as shown in FIG. 9.

Note 1) The separate speed noiseless connector will be on sale afterwards (See FIG. 10). Refer to

the manual when using it.

② Turn on the computer after the assembly is finished.

③ If an alarm sound is generated to indicate that the rotation of the CPU fan is slow after the system

monitoring program starts to operate during booting of the computer, please unplug the noiseless

connector from the fan and set “CPU Fan Detected” to “Disable” in the BIOS settings, or set the

slowest rotation of the CPU fan in the system monitoring program, to less than or equal to

1500 RPM. Then, reconnect the noiseless connector to the CPU fan connector.

Note 2) Some motherboards do not boot if the RPM of the CPU fan is not measured. In this case,

please boot the computer with the Cooler fan in Normal Mode, i.e. after removing the

noiseless connector. If the BIOS settings are updated, Silent Mode can be used by

reconnecting the noiseless connector. For information on updating the BIOS, please refer

to the motherboard manufacturer’s web site.

< Fig. 9 > < Fig. 10 >

Variable Speed Noiseless Connector

Motherboard

Noiseless Connector

CPU fan Connector (3-pin)

Fan Connector(3-pin)

(2) Normal Mode

① Connect the 3-pin connector of the fan directly

to the fan connector (3-pin) of the motherboard

as shown in FIG. 11.

② Turn on the computer after the assembly is finished.

③ If an alarm sound is generated to indicate that

the rotation of the CPU fan is slow after the

system monitoring program starts to operate

during booting of the computer, please set

“CPU Fan Detected” to “Disable” in the BIOS

settings, or set the slowest rotation of the CPU fan

to less than or equal to 1500 RPM.

< Fig. 11 >

Motherboard

CPU fan Connector (3-pin)

Fan Connector(3-pin)