NAVEE V40 Руководство по эксплуатации онлайн [7/32] 877773

09 10

EN EN

WARNING!

Only use the original battery charger to avoid potential damage or fire. Switch o the vehicle or into a certain

non-operational mode during charging.

Charge your scooter indoors, and never expose it to rain. Do not charge when the charging port or power cord is

wet. If the battery is damaged or soaked with water , it is forbidden to charge or continue to use the battery.

5. Charging

The scooter is fully charged when the LED on the battery charger changes from red to green.

When the scooter is turned o for about a month with the battery level of the scooter being lower than 30%, the

scooter will enter sleep mode. In this case, the scooter cannot be turned on. To exit the sleep mode, charge the

scooter for about three seconds to activate the battery.

1. Open the charging

port cover

2. Plug the battery

charger into the

charging port.

3. After charging, pull

the plug and close the

charging port cover

tightly

≤30%

+ =

≈ 30

Tips: You need to buy AirTag separately.

Install AirTag holder

Preload the AirTag into the AirTag holder according to the pictures.

Hold the stem, press the safety lock, pull out the quick release lever, fold the stem, and insert the AirTag

holder into the base.

Erect the vertical stem to a complete upright position, lift up the safety lock and push the folding wrench

inward tightly.