NAVEE V50 Руководство по эксплуатации онлайн [23/61] 878580

Inflate the Tire

Check the tire pressure every month, and inflate the

tires if the pressure is too low. The recommended tire

pressure is 45-50 psi.

If there is a lack of air in the front and rear tires, you

may use the extended nozzle supplied with the scooter

to inflate tires. First connect the extension nozzle

with air pump, then unscrew the front (rear) tire valve

cap, and connect the extension nozzle and the valve

securely together, then Inflate the tire.

WARNING! Tire removal is very complicated. Please do

not remove the tire by yourself. Improper operation

may aect the operation of the scooter. Please contact

professional support.

Adjust the Disc Brake

Tool: 4 mm hex key (the tool needs to be prepared by

the user).

Before adjusting, make sure the scooter is turned o

and not being charged. During adjusting, pull the end

of the brake cable to make the cable tight.

Note: If the brake is too tight, use the tool to loosen the

screw by turning it counterclockwise, pull the disc brake

rocker arm outwards, and then tighten the screw. If the

brake is too loose, use the tool to loosen the screw by

turning it counterclockwise, push the disc brake rocker

arm forwards, and then tighten the screw.

WARNING !

As with any mechanical component, a vehicle is subject to high stresses and wear. The various

materials and components may react dierently to wear or fatigue. If the expected service life for a component

has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches and

discoloration in the areas subject to high stresses indicate that the component has exceeded its service life and

please contact an authorized or a specialized repairer.

Valve Cap

Disc Brake Rocker Arm

Adjusting Screw