Home
Главная
Brayer
Электрические Чайники
BR1037 черный
Руководство по эксплуатации Страница: 7

Brayer BR1037 черный Руководство по эксплуатации онлайн [7/44] 879101

Brayer BR1037 черный Руководство по эксплуатации онлайн [7/44] 879102

mode (16) « », you will hear a sound signal, the set

temperature «100» will be displayed with digital symbols

(14), the indicators of the control buttons (16) «

», (10)

» and (17) « » will be glowing. The digital symbols

(14) will also show the heating temperature of the water in

the kettle ask (1).

• After the water boils, you will hear a sound signal and the

kettle will switch to the water temperature maintenance mode.

• Switch the kettle o󰀨 by pressing the on/o󰀨 button (17) «

».

• Remove the kettle from the base (7) and carefully pour

out boiled water into a suitable bowl.

• Remember that there is boiling water inside the kettle

ask (1), always hold the kettle only by the handle (6),

do not tilt the kettle sharply, in case of careless use of the

kettle you can get burns by hot water.

• Repeat the water boiling procedure several times.

ATTENTION! To avoid burns by hot steam, do not bend

over the spout (3).

• Hot water resulting from the rst boilings is not recommended

to consume, you may use it for domestic needs.

USING THE ELECTRIC KETTLE

• Place the kettle on a solid steady at and non-slip non-

metal surface away from heat sources as far as possible

from the edge of the surface.

WATER BOILING AND WATER TEMPERATURE

MAINTENANCE MODE

• Press the key (5), the cover (4) will open.

• Fill the kettle with water not lower than the «MIN» mark

and not higher than the «MAX» mark on the scale (9)

located on the inner surface of the ask (1).

• Close the lid (4) and place the kettle lled with water on

the kettle stand (7).

Note: always make sure that water drops do not fall on the

contact unit of the kettle stand (7).

A VARIANT OF BOILING WATER FOLLOWED BY

MAINTAINING THE WATER TEMPERATURE OF

100°C.

Note: enabling modes of maintenance of water temperature

of 70°C, 80°C and 90°C is similar to enabling the Boil mode.

• Plug the power cord into an electrical outlet, you will hear

a sound signal, all indicators of the control buttons will

light up and the temperature of the water in the ask (1)

of the kettle will be displayed with digital symbols (14).

Note: if no action is performed within 1 minute, the kettle will

automatically switch to the standby mode, all indicators of

the control buttons will go out, except for the indicator of the

kettle on/o󰀨 button (17) «

».

• If the kettle is in the standby mode, press the kettle on/o󰀨

button (17) «

», and the indicators of all control buttons

will light up.

• Press the button for switching on the water boiling

mode (16) «

», you will hear a sound signal, the set

temperature «100» will be displayed with digital symbols

(14), the indicators of the control buttons (16) «

», (10)

» and (17) « » will be glowing. The digital symbols

Brayer BR1037 черный Руководство по эксплуатации онлайн [7/44] 879101

Похожие устройства