Home
Главная
Brayer
Электрические Чайники
BR1083
Руководство по эксплуатации Страница: 7

Brayer BR1083 Руководство по эксплуатации онлайн [7/36] 879104

ATTENTION!

To avoid burns by hot steam, do not bend over the

spout (2).

• Once water starts boiling, the kettle will be switched

o󰀨 automatically and the indicator in the ON/OFF

button (7) will go out. Pour out water and repeat the

water boiling procedure several times.

• Hot water resulting from the rst boilings is not

recommended to consume, you may use it for

domestic needs.

USING THE ELECTRIC KETTLE

• Place the base (8) of the kettle on a solid steady

at and non-slip non-metal surface away from heat

sources as far as possible from the edge of the

surface.

• Ensure that the ON/OFF button (7) is always

accessible and is not blocked by foreign objects.

• Make sure that the kettle is switched o󰀨, the ON/OFF

button (7) is set to the position «0».

• To ll the kettle with water, take it o󰀨 the base (8),

press the lid (3) opening button (4).

• Fill the kettle with water not exceeding the maximal

mark «MAX» on the water level scale (6).

• Close the lid (3) and put the full kettle on the base

(8).

• Insert the power plug into the mains socket.

• To switch the kettle on, set the ON/OFF button (7) to

the position «I», the ON/OFF button (7) indicator will

light up.

• Once water starts boiling, the kettle will be switched

o󰀨 automatically and the indicator in the ON/OFF

button (7) will go out.

• Before removing the kettle from the base (8), make

sure that the kettle is switched o󰀨, the ON/OFF

button (7) is in the position «0».

• After switching the kettle o󰀨, wait for 15-20 seconds,

then you can switch it on again for re-boiling.

• If you need to switch the kettle o󰀨, set the power

switch (7) to the position «0».

• If you accidentally switched the kettle on, but the

water level appeared to be below the minimal mark,

the automatic thermal switch will be on and the kettle

will switch o󰀨.

• Unplug the kettle and let it cool down for 10-15

minutes, then ll the kettle with water and switch it

on, the kettle will operate in normal mode.

CLEANING AND MAINTENANCE

• Before cleaning unplug the kettle, pour out water and

let the kettle cool down.

Brayer BR1083 Руководство по эксплуатации онлайн [7/36] 879104

Похожие устройства