NAVEE V40 Pro Руководство по эксплуатации онлайн [12/32] 881739
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

NAVEE V40 Pro Руководство по эксплуатации онлайн [12/32] 881739

NAVEE V40 Pro Руководство по эксплуатации онлайн [12/32] 881739
19 20
EN EN
Inflate the Tire
Check the tire pressure every month, and inflate the
tires if the pressure is too low. The recommended tire
pressure is 45-50 psi.
If there is a lack of air in the front and rear tires, you
may use the extended nozzle supplied with the scooter
to inflate tires. First connect the extension nozzle
with air pump, then unscrew the front (rear) tire valve
cap, and connect the extension nozzle and the valve
securely together, then Inflate the tire.
WARNING! Tire removal is very complicated. Please do
not remove the tire by yourself. Improper operation
may aect the operation of the scooter. Please contact
professional support.
Adjust the Disc Brake
Tool: 4 mm hex key (the tool needs to be prepared by
the user).
Before adjusting, make sure the scooter is turned o
and not being charged. During adjusting, pull the end
of the brake cable to make the cable tight.
Note: If the brake is too tight, use the tool to loosen the
screw by turning it counterclockwise, pull the disc brake
rocker arm outwards, and then tighten the screw. If the
brake is too loose, use the tool to loosen the screw by
turning it counterclockwise, push the disc brake rocker
arm forwards, and then tighten the screw.
WARNING !
As with any mechanical component, a vehicle is subject to high stresses and wear. The various
materials and components may react dierently to wear or fatigue. If the expected service life for a component
has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches and
discoloration in the areas subject to high stresses indicate that the component has exceeded its service life and
please contact an authorized or a specialized repairer.
Valve Cap
Disc Brake Rocker Arm
Adjusting Screw
10. Care & Maintenance
Cleaning
Before cleaning the scooter, you must turn o the power, unplug the charging cables and close the charging cover
tightly.
Wipe the main chassis with a soft damp cloth, the hard-to-remove dirt can be scrubbed with a toothbrush.
Afterwards, wipe all areas with a dry cloth.
WARNING!
·
Do not wash the scooter with a high-pressure water spray.
·
Do not clean the scooter with corrosive cleaner, which will damage the external and internal structure of the
scooter.
Battery
Always charge before exhausting the battery to prolong the battery's lifespan.
When riding, storing or charging, do not exceed the specified temperature limit (refer to specifications). Failure to
follow instructions for use, storage or charging may result in battery damage, failure to charge and void warranty.
The fully charged scooter has an approximate standby time of 120-180 days. If it is not used for a long time, it should
be charged every 30 days. Please pay attention to the standby time to prevent irreversible damage to the battery
caused by not charging.
WARNING!
·
Do not use battery packs of other models or brands, as there may be a safety risk.
·
Only use the original battery charger to avoid potential damage or fire.
·
If the battery is damaged or soaked with water, do not charge or continue to use it.
·
Do not remove the battery. Removing the battery is complicated, and improper operation may aect the operation
of the scooter.
Storage
If the scooter will not be used for an extended period, fully charge it, then turn it o and store it in a cool, dry place.
Make sure the scooter is turned o when being transported and kept in its original packaging if possible.
WARNING!
·
Please do not leave the scooter under hot sun or severely humid place for extended periods of time.
·
Please do not place the scooter near flammable materials.
·
This product contains a built-in lithium battery and must be transported only when permitted by local laws and
regulations.

Похожие устройства

Скачать