NAVEE V40 Pro Руководство по эксплуатации онлайн [7/32] 881739

09 10

EN EN

WARNING!

Only use the original battery charger to avoid potential damage or fire. Switch o the vehicle or into a certain

non-operational mode during charging.

Charge your scooter indoors, and never expose it to rain. Do not charge when the charging port or power cord is

wet. If the battery is damaged or soaked with water , it is forbidden to charge or continue to use the battery.

5. Charging

The scooter is fully charged when the LED on the battery charger changes from red to green.

When the scooter is turned o for about a month with the battery level of the scooter being lower than 30%, the

scooter will enter sleep mode. In this case, the scooter cannot be turned on. To exit the sleep mode, charge the

scooter for about three seconds to activate the battery.

1. Open the charging

port cover

2. Plug the battery

charger into the

charging port.

3. After charging, pull

the plug and close the

charging port cover

tightly

≤30%

+ =

≈ 30

6. Connect with Mi Home/Xiaomi Home App

1. Scan the QR code on the scooter, located on the right

side of the footboard, or on the back cover of the user

manual to download the Mi Home APP.

2. Open the Mi Home/Xiaomi Home app. Tap "+" on the

top right corner and open "Scan" to scan the QR code

again. Then follow the instructions in the app to add

the scooter.

For your safely, the scooter will keep beeping when turned on and is limited to 10 km/h before being activated.

When the scooter is used for the first time, it must be activated via the Mi Home/Xiaomi Home app. Once the scooter

is activated, the beeping will stop and the speed restriction will be lifted.