Centek CT-1603 Руководство по эксплуатации онлайн [11/24] 881844

Centek CT-1603 Руководство по эксплуатации онлайн [11/24] 881844
11
body, then rotate the head counterclockwise until it is securely locked.
-
Insert the auger into the head, long axle first, and rotate it slightly until
it engages with the motor shaft.
-
Put the blade on the auger axle with the cutting edges facing you. If the
blade is not install correctly the meat will not be cut.
-
Install the desired grinder plate in front of the blade, aligning it with the
lugs on the grinder head.
-
Holding the plate from falling off with one hand, set and tighten the ring
nut with the other hand. Avoid overtightening the nut.
-
Install the hopper on the grinder head and seat it firmly in the operating
position.
- Place the appliance on a stable surface.
-
Do not obstruct the free flow of air at the bottom and sides of the motor
unit. Avoid blocking the ventilation holes on the bottom and side of the
motor unit.
5. MAINTENANCE
-
The meat trapped inside the auger can be driven out by grinding a piece
of bread.
-
Before cleaning turn the appliance off and disconnect it from power
supply.
-
Press the latch and remove the grinder head. Remove the pusher and
hopper.
-
Unscrew the ring nut and take all parts out of the grinder head. Do not
place grinder parts in a dishwasher!
-
Wash all parts contacting with meat in hot water with soap. Clean the
grinder immediately after use.
- Rinse the parts in clean cold water and let them dry.
-
It is recommended to lubricate the blade and grinder plates with a small
quantity of vegetable oil.
6. SPECIFICATIONS
- Rated voltage: 220-240 V ~50/60 Hz
- Nominal power rating: 300 W
- Max. power rating: 2000 W
- Output capacity: 2 kg/min
7. DISPOSAL OF THE APPLIANCE
Upon expiry of its service life the appliance can be disposed of separately
from ordinary domestic waste. You can turn it over to a specialized electric
and electronic appliance disposal and recycling centre.
8.CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end
user, provided the item will be used in strict accordance with the present
manual and the applicable technical standards. Upon expiry of the service
life please contact the nearest authorized service centre for suggestions
as to further operation of the appliance. The manufacturing date of the
appliance is integrated into the serial number (digits 2 and 3 - year, digits
4 and 5 - month of manufacture). If any questions related to appliance
maintenance should arise, or if the appliance has malfunctions, apply to the
CENTEK TM Authorized Service Center. The address of the service center can
be found on the website https://centek.ru/servis. Service support contacts:
Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center:
OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity No.
9. MANUFACTURER AND IMPORTER INFORMATION
I mported to EAEU by: Individualniy Predprinimatel
Asrumyan Karo
Shurikovich. Address: Russia, 350912, Krasnodar, ul. Atamana
Lysenko, 23,
pgt. Pashkovskiy. Phone: +7 (861) 2-600-900.
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the
date of sale to the end consumer. With this Warranty Card the Manufacturer
confirms the proper condition of the appliance and undertakes to repair, free
of charge, all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS
1. The guarantee shall be valid if the following documentation conditions
are observed:
- The original Warranty Card shall be filled out correctly and clearly,
indicating the of appliance model, serial number and sale date, the stamp
of the seller company and signature of its representative shall be available,
as well as the stamps on each coupon and the buyer’s signature in the
Warranty Card.
The Manufacturer reserves the right to reject guarantee maintenance if the

Похожие устройства

Скачать