Dreame Wet and Dry Vacuum H12S (HHR30B) Руководство по эксплуатации онлайн [9/89] 882716

11 1211 12

EN EN

Press and hold self-cleaning button for 3 seconds to activate drying mode.

The appliance will be charged once drying is completed.

Drying Mode

Note:

• After self-cleaning is complete, promptly clean the Used Water Tank. Clean the charging base if

there are any stains left on the base.

• If cleaning the brush roller manually, please air-dry it thoroughly or dry it by using drying mode

several times to ensure a good drying e󶀃ect.

How to Use Care & Maintenance

Tips:

• Turn o󶀃 the appliance before maintenance. Do not touch the power switch.

• Replace parts if needed. The parts must be replaced by those available from the

manufacturer or its service agent.

• If the vacuum is not used for an extended period, fully charge it, unplugthepower plug,

and store the vacuum in a cool, low-humidity environment away from direct sunlight. To

avoid over-discharge of the battery, charge the vacuum at least once every 3 months.

Cleaning the Used Water Tank and the Filter

1. Press the Used Water Tank release

button, and pull the Used Water Tank

outwards to remove it.

4. Re-install the 󶀄lter and the Used Water

Tank cover. Then re-install the Used Water

Tank until you hear a click.

Note:

• If the 󶀄lter is dirty, rinse it with clean water and dry it completely before use.

• Replacing the 󶀄lter every 3 to 6 months is recommended.

Click

Used Water

Tank Cover

Filter

2. Take out the 󶀄lter from the Used Water

Tank cover. Remove the tank cover and

pour out the wastewater.

3. Rinse the Used Water Tank and the tank

cover with water, the provided cleaning

brush can be used to clean the inner wall

of the tank.