Timberk T-CM33039 Руководство по эксплуатации онлайн [18/28] 882732

IM2022

• Press and hold the button you want to program – coffee for 1 cup or 2 cups

• When the desired portion of coffee drink is poured into the cup, release the button.

• or will blink, indicating that the quantity is saved correctly.

9. CLEANING AND MAINTENANCE

• Always disconnect the appliance from the mains before cleaning.

• Allow the coffee maker to cool completely and wipe the outer surfaces with a dry soft

cloth. Do not use aggressive chemicals or abrasive substances.

• Wash all removable parts with hot water with dish detergent, rinse thoroughly and

wipe them dry before installing them in place.

10. DESCALING

• Regularly descale the coffee maker.

• To descale, use 2-3% citric acid solution or special products that can be purchased

at the store and strictly follow the instructions on the package.

• Clean at least once every 2-3 months, and when using "hard" water more often.

• Fill the tank with water or descaling agent no higher than the maximum mark.

• Install the horn as described in the instructions above.

• Place one container under the coffee serving holes, the other under the steamer.

• Press the button on the control panel to turn on the device, select a portion for

2 cups , the solution will start flowing from the horn into the mug for a

previously set time. The cycle should be repeated 2-3 times.

• To clean the steamer: remove the handle from the steamer and place a suitable cup

under it. Wait until the foaming readiness indicator lights up, then turn on the steam

supply for about 2 minutes. Then turn off the steam supply and turn off the coffee

maker. Let the coffee maker cool down for about 10 to 15 minutes.

11. STORAGE

• Make sure that the appliance is disconnected from the mains and completely cooled

down.

• Follow all the requirements of the CLEANING AND MAINTENANCE section.

• Store the appliance in a cool, dry place.