Timberk T-HU6-A19E-W 5л, белый Инструкция по эксплуатации онлайн [20/0] 882839

IM2022

show waterless symbol and “ON/OFF” buton will be white. Refill water tank, and touch “ON/OFF”

button or unplug then plug in again to restart.

 During working, remove water tank, humidifier will stop working and “ON/OFF” button will be

white. Put back water tank, humidifier will work again.

AROMA BOX

 Press out aroma box from the base.

 Use water-soluble aroma oil and drop on to the sponge.

 Put the aroma box back into humidifier, the aroma function will remain on when the humidifier is

running.

 To stop the aroma function or when storing the humidifier, clean the sponge in the aroma box.

 Only drop aroma oil into aroma cotton. Do not drop any liquid except clean water into water tank or

basin.

9. CLEANING AND MAINTENANCE

 Before cleaning the appliance, make sure it is unplugged. Otherwise, it may result in electric shock.

 Before cleaning, in order not to burn your hands, wait until the water in the base of the appliance has

completely cooled.

 Use a damp and soft cloth to wipe the outside of the appliance.

 To avoid electric shock, do not scratch or damage the components of the device when cleaning.

 Do not use solvent, gasoline, dimethylbenzene, hard brush, talcum powder and other substances when

cleaning the device.

 Wipe off any remaining water inside the base of the unit under the tank with a damp and soft cloth.

 To remove water on small parts, you can use a brush and then wipe them again with a soft cloth.

 Clean the device once or twice a week.

 If dirt is formed on the membrane, clean it with a brush.

 Rinse the water tank cover and nozzle carefully and effortlessly with fresh water, otherwise this will

cause water to leak through the cover.

 After removing any remaining water from the surface of nozzle, wipe it with a soft cloth.

 Clean the outside of the appliance with a damp and soft cloth.

IMPORTANT!

 To avoid deformation of working surfaces, resulting in decreased atomizing or other malfunctions, do

not use metallic brushes, blades or talc powder to wipe the atomizer’s surface.

 The water tank may leak after heavy impacts.

 In case of water leakage, immediately stop using the unit and contact an authorized service center.

 To keep the unit dry, wipe the water after cleaning and dry the unit’s base and water tank. Make sure

that there is no water left inside the unit’s base and water tank.

 Before a long break in use, dry the base and the tank, but the tank on the base and pack the device in a

plastic bag, then put it in a box.

 Store the unit in a low-humidity room.

 Storing the unit undried results in generation of mold.

To clean the water tank and parts of the base of the device from salt deposits, use citric acid: