Bosch HSG636BS1 Руководство по эксплуатации онлайн [20/44] 883312
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch HSG636BS1 Руководство по эксплуатации онлайн [20/44] 883312

Bosch HSG636BS1 Руководство по эксплуатации онлайн [20/44] 883312
en Basic settings
20
5.
Press to start the operation.
a The appliance starts to heat and the time starts to
count down.
6.
Once the cooking time has elapsed, an audible sig-
nal sounds. The cooking time is at zero. The appli-
ance stops heating up and responds again as usual
outside of Sabbath mode.
‒ Press to switch the appliance off.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
15  Basic settings
You can configure the appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting Selection
Language See selection on the appli-
ance.
Clock Clock in 24-hour format.
Water hardness
→"Before using for
the first time", Page11
00 (softened)
01 (soft)
02 (med.)
03 (hard)
04 (very hard)
1
Factory setting Reset
Do not reset
1
Audible signal Short duration (30 seconds)
Medium duration (1 minute)
1
Long duration (5 minutes)
Volume 5 settings
Button tone Switched on
Switched off (tone remains
for ⁠)
1
Display brightness 5 settings
Clock display Off
Digital
1
Analogue
Lighting Off during operation
On during operation
1
Operation after switch-
on
Main menu
Types of heating
1
Steam
Assist
Night-time dimming Switched off
1
Switched on
Brand logo Display
1
Do not display
1
Factory setting (may vary according to model)
Basic setting Selection
Fan run-on time Recommended
1
Minimum
Pull-out system Not retrofitted (if shelf sup-
ports and a single set of
pull-out rails are fitted)
1
Retrofitted (if two or three
sets of pull-out rails are fit-
ted)
Sabbath mode Switched on
Switched off
1
1
Factory setting (may vary according to model)
15.2 Changing the basic settings
Requirement:The appliance is switched on.
1.
Press ⁠.
2.
Press "Basic settings".
3.
Press the required basic setting and use the control
ring to change it.
The red bar next to the text field identifies the basic
setting that is currently selected. Its corresponding
value is shown in the display.
4.
Use"Further settings" to scroll through the basic
settings and, if required, usethe control ring to
change any of these settings.
5.
To save your changes, press and use "Save"
to confirm.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
▶
Press and use "Do not save" to confirm.
a All changes will be discarded and not saved.
15.3 Setting the time
Requirement:The appliance is switched on.
1.
Press ⁠.
2.
Press "Basic settings".
3.
Press "Time".
4.
Use the control ring to change the time.
5.
To save your changes, press and use "Save"
to confirm.

Похожие устройства

Скачать