Tineco FLOOR ONE S5 Combo Руководство по эксплуатации онлайн [15/36] 884044

Tineco FLOOR ONE S5 Combo Руководство по эксплуатации онлайн [15/36] 884044
EN
13
Usage of Hand Vac
1.Install the dustbin to the main body properly
and it clicks into place.
Fig.C-12
2.Attach the accessory tool onto the dustbin, it
will click into position when correctly tted.
Fig.C-13
Press the release button to remove the dustbin.
Pull out the mesh lter as above and empty the
contents.
Press the HEPA lock button to take out the
HEPA and sponge lter, clean both parts with
the cleaning tool.
Fig.C-14
Note:
Clean the dustbin and lters after each use.
To maintain high performance, wash and dry
the sponge lter monthly, replacing it every
6 months. Wash and dry the HEPA lter every
3 months, replacing it every 12 months.
Air dry completely before reinstalling.
Runtime
The runtime for the Floor Washer is about
15~20 minutes.
The runtime for the Hand Vac is about
25~50 minutes.
Estimated runtime data was obtained by
Tineco Laboratory.
Charging Time
A full charge takes approximately 3~4 hours.
Estimated data was obtained by Tineco
Laboratory using ambient temperatures
ranging from 39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
Battery level 10%: battery
indicator will be illuminated.
Battery level ≤ 10%: battery
indicator will be blinking.
Off: no power detected or
possible battery malfunction.
Indicator blinking: dirt sensor
malfunction or blocked.
Indicator blinking: CWT is
empty.
Indicator blinking: DWT is full
or channel has a blockage.
Indicator blinking: brush roller
has a blockage.
Illuminated: WiFi has
successfully connected.
Blinking: WiFi is connecting.
Off: WiFi is not connected,
please connect to the network.
Indicator blinking: appliance is
in need of self-cleaning.
During Charging
Tineco indicator: breathing.
Fully Charged
In 5 minutes: Tineco indicator
illuminated.
After 5 minutes: all indicator
lights turn off.
Скачать