Neoline EasyDrive 2K Wi-Fi Dual Руководство по эксплуатации онлайн [4/16] 884136

The Emergency recording is activated automatically when the G-sensor

triggers (sudden acceleration/deceleration), or at a collision. The

Emergency recording is locked automatically to avoid erasing during

loop recording. The files protected from overwriting are stored on the

memory card in the EVENT folder.

To activate the parking mode, you will need to connect a proprietary

cable (check the package information on the box), which will allow you

to activate Time Lapse or emergency recording while the engine is off.

Loop recording is not available in parking mode. Emergency recording

begins 10 seconds after the G-Sensor is triggered.

ATTENTION! You need to connect the proprietary cable as shown

below. If connected incorrectly, the function will not work!

Where: GND – vehicle ground, ACC – power supplied when the engine

is running, +12V – power from the battery.

Attention! Wire color may vary! Refer to the markings on the wires to

avoid malfunction of the device.

Emergency recording is automatically activated when the G-sensor is

triggered (sudden acceleration, braking) or a collision. Such files are

stored on the memory card in the EVENT folder.

Possible problems and their solutions

• Cannot take photos or record videos.

Check whether there is enough free space on the microSD card and

whether it is not locked.

GND

ACC(+12V)

+12V

ACC

B+