Brayer BR1081 молочный Руководство по эксплуатации онлайн [6/36] 884381
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1081 молочный Руководство по эксплуатации онлайн [6/36] 884381

Brayer BR1081 Руководство по эксплуатации онлайн [6/36] 879088
6
EN
ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE KETTLE FOR
INDUSTRIAL OR LABORATORY PURPOSES.
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the kettle and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the kettle for damages, in case of damage
do not plug it into the mains.
• Make sure that the specications of power supply
voltage specied on the lower panel of the unit or the
base correspond to the specications of your mains.
• Wipe the outer surface of the ask (1) with a clean,
slightly damp cloth to remove dust.
• Place the base (8) of the kettle on a solid steady
at and non-slip non-metal surface away from heat
sources as far as possible from the edge of the
surface.
• Do not place and do not use the kettle in closed
space, for example, in the cupboard or in closed
structures – this can lead to its breakage, cause
harm to the user or damage to his/her property.
• Wash the kettle ask (1) with neutral detergents,
rinse and dry. Wipe the outer surface of the ask (1)
with a slightly damp cloth and then wipe it dry. Do not
use abrasives or coarse scourers for this.
• Before connecting the kettle, make sure that there
are no moisture drops on the ask (1), the power
cord and the power plug.
• Make sure that the voltage specications indicated
on the bottom panel of the unit or the base match
those of your electrical network.
• Wipe the outer surface of the Jug (1) with a clean,
slightly damp cloth to remove dust.
• Place the Base (7) of the Kettle on a solid steady
at and non-slippery non-metallic surface away from
heat sources and as far away from any edge of the
surface as possible.
Note: the Base (7) comes with Cord Storage (8) for
winding the power cord; adjust the power cord to an
optimal length, arranging it accordingly.
• To ll the Kettle with water, grasp the Kettle Handle
(5), remove it from the Base (7), take the Lid Handle
(4), and remove the Lid (3).
• Fill the Kettle with water up to the «MAX» mark on
the water gauge located on the inner surface of the
Kettle Jug (1).
• Place the Lid (3) back in position, ensuring it is tightly
closed.
• Set the lled Kettle back onto the Base (7).
• Plug the power cord into an electrical outlet.

Похожие устройства

Скачать