Smeg STL362DQ Руководство по эксплуатации онлайн [22/60] 884629

1. Release the stoppers on the sides of the

sliding rails of the cutlery drawer and pull

the drawer out.

2. Move the upper basket to the lowest level

to reach the spray arm more easily.

3. To detach the spray arm (C) from the

delivery tube (A), turn the mounting

element (B) counterclockwise and pull the

spray arm downwards.

4. Wash the spray arm under running water.

Use a thin pointed tool, e.g. a toothpick,

to remove particles of soil from the holes.

Run the water through the holes to wash

soil particles away from the inside.

5. To install the spray arm (C) back, insert

the mounting element (B) in the spray

arm and fix it in the delivery tube (A) by

turning it clockwise. Make sure that the

mounting element locks into place.

6. Install the cutlery drawer on the sliding

rails and block the stoppers.

13. TROUBLESHOOTING

WARNING!

Improper repair of the appliance may

pose a danger to the safety of the user.

Any repairs must be performed by

qualified personnel.

The majority of problems that may occur

can be solved without the need to contact

an Authorised Service Centre.

Refer to the below table for information on

possible problems.

With some problems, the display shows an

alarm code.

Problem and alarm code Possible cause and solution

You cannot activate the appli‐

ance.

• Make sure that the mains plug is connected to the mains socket.

• Make sure that there is no damaged fuse in the fuse box.

22 ENGLISH