Home
Главная
Brayer
Роботы для мойки окон
BR5000 синий
Руководство по эксплуатации Страница: 11

Brayer BR5000 синий Руководство по эксплуатации онлайн [11/68] 884950

(2) for 2 seconds, the vacuum pump will switch o󰀨,

remove the robot from the glass.

• Detach the safety rope (6) from where it is secured,

and unplug the power cord of the power adapter (29)

from the mains socket (g. 8).

• Remove the cleaning rings (16) and remove the

cloths (11) from them.

• After each use of the robot, it is recommended to

wash the cleaning cloths (11) in warm water using a

neutral detergent, rinse them thoroughly and dry.

Notes:

- keep the cleaning cloths (11) clean and wash them

after every use of the robot;

- It is prohibited to turn the cleaning cloths (11)

inside out during the robot operation and continue

to use them; the cloths (11) collect particles of dust

and debris, and debris getting into the vacuum

pump can lead to its failure.

DRY CLEANING OF WINDOWS

• Dry cleaning is used only for outside surface or for

very dirty windows.

• Do not spray water on the window glass (g. 9).

• Use clean and dry cleaning cloths (11) so the robot

will wipe dry dust o󰀨 the outside glass surface.

• After dry cleaning, it is recommended to wash the

cloths (11) in warm water with neutral detergent,

rinse thoroughly and dry.

WET CLEANING OF WINDOWS

• For wet window cleaning, ll the water tank (see the

chapter FILLING THE WATER TANK).

• During the operation the water is sprayed on the

cleaned surface from the nozzle (10) on the right or

left side.

• If the robot moves to the left, then water is sprayed

from the left nozzle (10), if the robot moves to the

right, then water is sprayed from the right nozzle (10).

• If the robot moves downwards, the water is sprayed

from the right side.

BACKUP BATTERY

• The built-in backup battery is used in case of an

emergency power outage or accidental switching

o󰀨 of the power adapter; in this case, the robot will

not fall and will continue to operate on the backup

battery.

ATTENTION! The robot’s operating time when powered

by a backup battery is limited; with a fully charged

battery, the operating time is no more than 30-40

minutes.

• If there is a power outage at the electrical outlet, the

robot will remain in the cleaning area and you will

hear a sound signal.

• The robot normal operation indicators (blue) (3, 12)

and malfunction indicators (red) (4, 13) will ash

alternately.

• Take immediate action to prevent the robot from

falling o󰀨 the surface being cleaned.

• Slowly pull the device towards you by the safety rope

Brayer BR5000 синий Руководство по эксплуатации онлайн [11/68] 884950

Похожие устройства