Brayer BR5000 синий Руководство по эксплуатации онлайн [9/68] 884950
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR5000 синий Руководство по эксплуатации онлайн [9/68] 884950

Brayer BR5000 синий Руководство по эксплуатации онлайн [9/68] 884950
9
EN
surface.
- The built-in backup battery is used in case of an
emergency power outage or accidental switching
o󰀨 of the power adapter; in this case, the robot will
not fall and will continue to operate on the backup
battery.
ATTENTION! The robot’s operating time when powered
by a backup battery is limited; with a fully charged
battery, the operating time is no more than 30-40
minutes.
- The safety rope also improves safety when using
the robot.
- Cleaning of the working surface is carried out by
two rotating driving disks (15), where the cleaning
rings (16) with cloths (11) are attached.
- You can wash the cleaning cloths (11) before
using them again.
- The robot has articial intelligence, it calculates
the path of movement, automatically detects the
edge of the window, and automatically supplies
water for wet cleaning of the surface.
- If you need to manually control the robot, use the
remote control (17).
BEFORE THE FIRST USE
After the device’s transportation or storage at
negative temperature, unpack it and wait for at least
3 hours before using it.
• Unpack the device and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the device for damages; do not plug a
damaged device into the mains.
• Make sure the indicated power adapter voltage
specications correspond to the specications of your
mains. When the power adapter is used in the mains
with 60 Hz frequency, it does not need any additional
settings.
BACKUP BATTERY CHARGING
• Insert the plug (31) of the robot power cord (30) into
the socket (8) and thread it rotating clockwise (g. 1).
• Insert the power cord (29) into the power adapter
socket (29).
• Insert the power cord plug (29) into the mains socket
(g. 2).
• When the indicator (5) turns green to indicate that
the backup battery is fully charged, unplug the power
cord (29) from the mains socket.
INSTALLING THE CLEANING CLOTHS
• Put the cloths (11) on the cleaning rings (16), install
the cleaning rings (16) on the driving discs (15) (g.
3).
• Make sure that the cleaning rings (16) are installed
correctly and without distortion, this will prevent air
leaks and ensure reliable operation of the vacuum

Похожие устройства

Скачать