Sven SB-2200D Руководство по эксплуатации онлайн [7/18] 886813

ENG

SB-2200D

Operation Manual

Player mode

•The system will automatically switch to the Player mode if you install USB ash in the slot f

oruse the a button on the top panel or the p button on the remote control. The selected

mode is displayed on the LED-display. Playback starts automatically.

Bluetooth mode

•To transmit a signal in this mode, at rst connect the device to the signal source (see Fig. 6).

To do this, select the Bluetooth mode using the b button on the top of the soundbar or the k

button on the remote control. The MSS switches to the search mode, the display a displays “BT”.

•It is necessary to select the search mode of devices with Bluetooth on a signal source (tele-

phone, notebook, smartphone, etc.). “SVEN SB-2200D” massage will be displayed onthescreen

which is to be connected to**.

•If the connection is successful, the “BT” indicator has a steady glow. If the connection fails,

the“BT” indicator is intermittent. It is necessary to re-translate the system into the search mode

(turn it o and on again) ***.

Note. When watching streaming video, the audio track may lag behind the image. This

isnotamalfunction, but is due to the technical capabilities of the source and receiver Blue-

tooth chips. To eliminate this desynchronization, it is recommended to use an HDMI (ARC)

connection, an optical or signal cable with an audio source.

Due to the constant development of the software, the actual MSS operation may dier fromthat

described in this manual. The most recent version of the manual is available atwww.sven..

* Wireless Subwoofer connection:

NOTE: After turn on the soundbar and subwoofer, it will automatic connected, if not, please

following below step to connect by manual:

A. Power on the Soundbar and subwoofer, the LED on rear of subwoofer will ashing, and

switch the Soundbar to BT mode. Pay attention to: At this stage, do not connect any devices

(such as mobile phone, tablet) to the soundbar.

B. Holding the Play/Pause (

) button more than 3 seconds, the display will showed "pair", after

connected successfully, the soundbar will have voice prompts “du”, and the LED on rear of sub-

woofer keeping light. The rst connection should take about 10 seconds.

** You might have to enter “0000” code to connect some models of devices via Bluetooth.

*** If the item has been already registered in the device list of a source, then the second search

mode activation is not obligatory. Choose the item name “SVEN SB-2200D” and the “connect”

command on the source.