Home
Главная
Miele
SGDA3 R
Инструкция по эксплуатации Страница: 65

Miele SGDA3 R — как заменить фильтр в пылесосе: пошаговое руководство [65/80]

Miele SGDA3 R Инструкция по эксплуатации онлайн [65/80] 887476

en

65

 Open the dust compartment lid (Fig.

09).

 Lift the exhaust filter and remove it

(Fig. 40).

 Insert a new exhaust filter, making

sure it goes in properly, then press it

down into position (Fig. 41).

 If you are using exhaust filter c, d or

e, you must also activate the

timestrip® filter change indicator (Fig.

11).

After approx. 10–15 seconds, a thin red

line will appear in the left-hand side of

the display(Fig. 12).

If you wish to fit an AirCleanexhaust

filter, see “Replacing one type of ex-

haust filter with another”.

 Close the dust compartment lid.

Replacing one type of exhaust filter

with another(Fig. 08)

Depending on model, your vacuum

cleaner will be fitted as standard with

one of the following exhaust filters:

a AirClean

b AirClean Plus50 (light blue)

c Silence AirClean50 (grey)

d Active AirClean50 (black)

e HEPA AirClean50 (white)

Do not use more than one exhaust

filter at a time.

When changing the filter, please note

1. If you wish to replace exhaust filter a

with filter b, c, d or e, it is essential

that you remove the filter grille before

you fit the new exhaust filter.

If you are using exhaust filter c, d or

e, you must also activate the

timestrip® filter change indicator

(Fig. 11).

2. If you wish to replace exhaust filter b,

c, d or e with filter a, it is essential

that you also fit the filter grille* (Fig.

39).

* Filter grille – see “Optional ac-

cessories”

Maintenance indicator with reset but-

ton (Fig. 42)

Some models are fitted with a mainten-

ance indicator.

The indicator lights up after approxim-

ately 50hours of operation, which is

equivalent to about a year of average

use. The level of soiling of the motor

protection filter and the exhaust filter

must be checked at this point.

The indicator must be reset each time

the filters are replaced. The vacuum

cleaner must be switched on to do this.

 Press the reset button.

The maintenance indicator will go out

and reset to zero.

The indicator can only be reset by

pressing the reset button after the light

has come on. Pressing the button at

any other time will have no effect.

Похожие устройства

Узнайте, как правильно заменить фильтр в пылесосе. Пошаговые инструкции и советы по использованию различных типов фильтров для оптимальной работы устройства.