Xiaomi A27i Руководство по эксплуатации онлайн [5/59] 887903

Wall mounting

• For installation methods and precautions, please refer to the installation guide of the wall mount you purchased.

• The wall mount must be purchased separately.

• Tip: This product is compatible with wall mounts that have a hole spacing of 75 × 75 mm.

• The bolts used to secure the wall mount must meet the following requirements: Quantity: 4; Thread: M4; Length: 10 mm.

• Lay the monitor ﬂat, with its back facing upwards. Use your ﬁnger to press the spring clip that joins the base to the monitor and remove the base.

• Note: When removing the base, be careful not to pinch your ﬁnger in the spring clip.

• Follow the wall mount user manual and install the wall mount onto the bolts that are built into the housing back.

Troubleshooting

Issue Possible Cause Solutions

Unable to turn on No power Make sure the power adapter is plugged in properly.

Image is dark

Brightness/ Contrast not adjusted

properly

Adjust the brightness and contrast.

Image is jittery or has ripples Interference

Keep the monitor away from electronic devices that may cause

electrical Interference.

No image on the screen. No signal, entering sleep mode

Turn on the computer.

Make sure the computer’s graphics card is working properly.

Make sure the cable is plugged in properly.

The monitor displays that the current

resolution is not supported

Resolution is incorrect Use the specified recommended resolution settings.

Secure the wall

mount as shown

in the picture.