Garmin Marq Aviator (Gen 2) Silver Руководство по эксплуатации онлайн [45/168] 891018

Entering Jump Information

1 Press START.

2 Select Jumpmaster.

3 Select a jump type (Jump Types, page36).

4 Complete one or more actions to enter your jump information:

• Select DIP to set a waypoint for the desired landing location.

• Select Drop Alt. to set the drop altitude AGL (in feet) when the jumpmaster exits the aircraft.

• Select Open Alt to set the open altitude AGL (in feet) when the jumpmaster opens the parachute.

• Select Forward Throw to set the horizontal distance traveled (in meters) due to aircraft speed.

• Select Crs. to HARP to set the direction traveled (in degrees) due to aircraft speed.

• Select Wind to set the wind speed (in knots) and direction (in degrees).

• Select Constant to fine-tune some information for the planned jump. Depending on the jump type, you

can select Percent Max., Safety Factor, K-Open, K-Freefall, or K-Static and enter additional information

(Constant Settings, page38).

• Select Auto to DIP to enable navigation to the DIP automatically after you jump.

• Select Go To HARP to start navigation to the HARP.

Entering Wind Information for HAHO and HALO Jumps

1 Press START.

2 Select Jumpmaster.

3 Select a jump type (Jump Types, page36).

4 Select Wind > Add.

5 Select an altitude.

6 Enter a wind speed in knots and select Done.

7 Enter a wind direction in degrees and select Done.

The wind value is added to the list. Only wind values included in the list are used in calculations.

8 Repeat steps 5–7 for each available altitude.

Resetting Wind Information

1 Press START.

2 Select Jumpmaster.

3 Select HAHO or HALO.

4 Select Wind > Reset.

All wind values are removed from the list.

Entering Wind Information for a Static Jump

1 Press START.

2 Select Jumpmaster > Static > Wind.

3 Enter a wind speed in knots and select Done.

4 Enter a wind direction in degrees and select Done.

Activities and Apps 37