Candy CBT60RWG-07 Руководство по эксплуатации онлайн [11/26] 891429

CARBON FILTER-not supplied

Activated carbon filter can be used to trap odors. Normally the activated carbon filter

should be changed at three or six months according to your cooking habit. The

installation procedure of activated carbon filter is as below.

1. Before installing or replacing the carbon filters, please remove power to the unit.

2. Press the filter lock and remove the mesh filter.

3. Turn the carbon filter on both side of the motor anti-clockwise. Replace the

carbon filters with the new carbon filters.

4. Place the mesh filter.

5. Connect the power supply to the wall socket.

NOTE:

 Make sure the filter is securely locked. Otherwise, it would loosen and cause

dangerous.

 When activated carbon filter attached, the suction power will be lowered.

BULB REPLACEMENT

Important :

 The bulb must be replaced by the manufacturer , its

service agent or similarly qualified persons.

 Always switch of f the el ectricity suppl y before

carrying out any operati ons on the appliance. When

handling bulb, make sure i t is compl etely cool down

before any direct contact to hands.

 When handling gl obes hold wi th a cloth or gloves to

ensure perspi ration does not come in cont act with

the globe as this can reduce the life of the globe.

Note:

 Before changing the lights, make sure that the appliance is plugged off.

 Protect against danger when changing lights, such as wearing gloves.

Changing the lights:

Use the screw driver loosen the ST4*8MM self tapping screw (2pcs) from the lighting

panel, take out the lighting fixture. Open the terminal box that connected with the wire,

disconnect the wire connector and replace the lamp.

• ILCOS D code for this lamp is: DBS-2/65-H-120/33

– Max wattage: 1×2 W

– Voltage range: AC 110-240V