Home
Главная
Brayer
Электрические Чайники
BR1003 черный/хромированный
Руководство по эксплуатации Страница: 4

Brayer BR1003 черный/хромированный Руководство по эксплуатации онлайн [4/25] 892198

6 7en en

• Transport the kettle in the original package.

• Keep the unit out of reach of children and disabled

• persons.

ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD

USE ONLY, DO NOT USE THE KETTLE FOR ROOM

HEATING, FOR INDUSTRIAL OR LABORATORY

PURPOSES

BEFORE USING THE KETTLE

After unit transportation or storage at low

temperature, it is necessary to keep it for at least

three hours at room temperature.

• Unpack the kettle and remove all the packaging

materials.

• Keep the original package.

• Check the delivery set.

• Read the safety measures and operating

recommendations.

• Examine the kettle for damages, in case of damage

do not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the lower panel of the unit or

the base correspond to the specications of your

mains. When using the kettle in the mains with 60

Hz frequency, the unit does not need any additional

settings.

• Wipe the base (1), the outer and inner surfaces of the

ask (2) with a clean, slightly damp cloth to remove

dust.

ATTENTION!

Be careful while handling the kettle, glass ask (2)

can break when the kettle is dropped or hit against a

solid object.

Notes:

- the operation mode buttons on the control panel

(9) are sensory, you just need to touch the button

to switch the necessary operation mode on.

- each touching of buttons is accompanied by a

sound signal.

• Place the base (1) on a solid steady at and non-slip

non-metal surface away from heat sources as far as

possible from the edge of the surface.

• Do not place and do not use the kettle in closed

space, for example, in the cupboard or in closed

structures — this can lead to its breakage, cause

harm to the user or damage to his/her property.

• Wash the ask (2) with neutral detergents, rinse and

dry. Wipe the outer surface of the ask (2) with a

slightly damp cloth and then wipe it dry. Do not use

abrasives and coarse scourers for this.

• Before connecting the kettle, make sure that there

are no moisture drops on the base (1), the ask (2),

the power cord and the power plug.

• Remove the kettle from the base (1).

• To ll the kettle with water press the lid opening

button (6) and open the lid (5).

• Fill the kettle with water up to the «MAX» mark,

according to the scale situated on the outer surface

of the ask (2).

• Close the lid, make sure that the kettle lid is closed

tightly.

• Place the kettle on the base (1).

• Insert the power plug into the mains socket, you will

hear a sound signal and the water temperature in the

kettle ask (2) will appear on the display (10).

• Press the On/Off button (12) «

». The kettle will

switch on, you will hear a sound signal and the

illumination (8) of the ask (2) will light up. As water

is heated, the digital water temperature symbols

in the ask (2) will be shown on the display (10),

the On/Off button (12) « » illumination will be

ashing, after water starts boiling you will hear sound

signals, the kettle will switch off automatically, the

ask illumination (8) will go out, the On/Off button

(12) « » illumination will go out.

• Remove the kettle from the base and carefully pour

out boiled water into a suitable bowl.

• Remember that there is boiling water inside the kettle

ask (2), always hold the kettle only by the handle

(7), do not tilt the kettle sharply, in case of careless

use of the kettle, you can get burns by hot water.

• Repeat the water boiling procedure several times.

• Hot water resulting from the rst boilings is not

recommended to consume, you may use it for

domestic needs.

USING THE ELECTRIC KETTLE