Home
Главная
Brayer
Электрические Чайники
BR1080 черный/нержавеющая сталь
Руководство по эксплуатации Страница: 4

Brayer BR1080 черный/нержавеющая сталь Руководство по эксплуатации онлайн [4/21] 892256

6 7en en

• Do not repair the unit by yourself. Do not

disassemble the unit by yourself, if any malfunction

is detected, and after it was dropped, unplug the unit

and apply to the service center.

• Transport the unit in the original package only.

• Keep the unit out of reach of children and disabled

persons.

ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD

USE ONLY, DO NOT USE THE KETTLE FOR ROOM

HEATING, FOR INDUSTRIAL OR LABORATORY

PURPOSES

BEFORE USING THE KETTLE

After unit transportation or storage at low

temperature, it is necessary to keep it for at least

three hours at room temperature.

• Unpack the kettle and remove all the packaging

materials.

• Keep the original package.

• Check the delivery set.

• Read the safety measures and operating

recommendations.

• Examine the kettle for damages, in case of damage

do not plug it into the mains.

• Makesurethatthespecicationsofpowersupply

voltagespeciedonthelowerpaneloftheunitor

thebasecorrespondtothespecicationsofyour

mains. When using the kettle in the mains with 60 Hz

frequency, the unit does not need any additional

settings.

• Wipetheouterandinnersurfacesoftheask(1)with

a clean, slightly damp cloth to remove dust.

• Placethekettleonasolidsteadyatandnon-slip

non-metal surface away from heat sources as far as

possible from the edge of the surface.

• Do not place and do not use the kettle in closed

space, for example, in the cupboard or in closed

structures — this can lead to its breakage, cause

harm to the user or damage to his/her property.

• Washthekettleask(1)withneutraldetergents,

rinseanddry.Wipetheoutersurfaceoftheask(1)

with a slightly damp cloth and then wipe it dry. Do not

use abrasives and coarse scourers for this.

• Before connecting the kettle, make sure that there

arenomoisturedropsontheask(1),thepower

cord and the power plug.

• Tollthekettlewithwaterpressthelidlockbutton

and open the lid.

• Fill the kettle with water up to the «MAX» mark

situatedinsidethekettleask(1).

• Close the lid, make sure that the kettle lid is closed

tightly.

• Insert the power plug into the mains socket.

• To switch the kettle on, press the on button (3)

«RESET», the light indicator (5) will light up.

• Once water starts boiling, the kettle will be switched

off automatically, the light indicator (5) will

• go out. Pour out water and repeat the water boiling

procedure several times.

• Hotwaterresultingfromtherstboilingsisnot

recommended to consume, you may use it for

domestic needs.

USING THE ELECTRIC KETTLE

• Placethekettleonasolidsteadyatandnon-slip

non-metal surface away from heat sources as far as

possible from the edge of the surface.

• Ensure that the ON button is always accessible and

is not blocked by foreign objects.

• Tollthekettlewithwaterpressthelidlockbutton

and open the lid.

• Fill the kettle with water not exceeding the maximal

mark «MAX».

• Closethelidandputthelledkettleonaneven

stable

• surface.

• Insert the power plug into the mains socket.

• To switch the kettle on, press the on button (3)

«RESET», the light indicator (5) will light up.

ATTENTION!

To avoid burns by hot steam, do not bend over the

spout (4).

• Once water starts boiling, the kettle will be switched

off automatically, the light indicator (5) will go out.

• After switching the kettle off, wait for several minutes,

then you can switch it on for water reboiling by

pressing the ON button (3) «RESET».

• If you need to switch the kettle off, unplug it.

• If you accidentally switch the kettle on, but the water

level appears to be minimal,

• the automatic thermal switch will be on and the kettle

will switch off.

• In this case unplug the kettle and let it cool down

for10-15minutes,thenllthekettlewithwaterand

switch it on, the electric kettle will operate in normal

mode.

CLEANING AND MAINTENANCE

• Before cleaning disconnect the kettle from the mains,

pour out water and let the kettle cool down.

• Wipetheoutersurfaceoftheask(1)withaslightly

dampclothandthenwipetheask(1)dry.Usesoft

detergents to remove dirt; do not use metal sponges

and abrasive detergents and solvents.

• Do not immerse the electric kettle into water or any

other liquids, do not wash it in the dishwasher.

DESCALING

• Scale,appearinginsidetheask(1),inuencesthe

water taste and disturbs the heat exchange between

water and the heating element.

Brayer BR1080 черный/нержавеющая сталь Руководство по эксплуатации онлайн [4/21] 892256

Похожие устройства